GETTYTAB(5) BSD Programmer's Manual GETTYTAB(5)
gettytab - terminal configuration data base
The gettytab file is a simplified version of the termcap(5) data base
used to describe terminal lines. The initial terminal login process get-
ty(8) accesses the gettytab file each time it starts, allowing simpler
reconfiguration of terminal characteristics. Each entry in the data base
is used to describe one class of terminals.
There is a default terminal class, default, that is used to set global
defaults for all other classes. (That is, the default entry is read,
then the entry for the class required is used to override particular set-
Refer to termcap(5) for a description of the file layout. The default
column below lists defaults obtained if there is no entry in the table
obtained, nor one in the special default table.
Name Type Default Description
ap bool false terminal uses any parity
bd num 0 backspace delay
bk str 0377 alternate end of line character
cb bool false use crt backspace mode
cd num 0 carriage-return delay
ce bool false use crt erase algorithm
ck bool false use crt kill algorithm
cl str NULL Ta screen clear sequence
co bool false console - add `\n' after login
ds str `^Y' delayed suspend character
dx bool false set DECCTLQ
ec bool false leave echo OFF
ep bool false terminal uses even parity
er str `^?' erase character
et str `^D' end of text (EOF) character
ev str NULL Ta initial environment
f0 num unused tty mode flags to write messages
f1 num unused tty mode flags to read login name
f2 num unused tty mode flags to leave terminal
fd num 0 form-feed (vertical motion) delay
fl str `^O' output flush character
hc bool false do NOT hangup line on last close
he str NULL Ta hostname editing string
hn str hostname hostname
ht bool false terminal has real tabs
ig bool false ignore garbage characters in login
im str NULL initial (banner) message
in str `^C' interrupt character
is num unused input speed
kl str `^U' kill character
lc bool false terminal has lower case
lm str login: login prompt
ln str `^V' ``literal next'' character
lo str /usr/bin/login program to exec when name
nd num 0 newline (line-feed) delay
nl bool false terminal has (or might have) a
np bool false terminal uses no parity (i.e.
nx str default next table (for auto speed
op bool false terminal uses odd parity
os num unused output speed
pc str `\0' pad character
pe bool false use printer (hard copy) erase
pf num 0 delay between first prompt and
following flush (seconds)
ps bool false line connected to a MICOM port se-
qu str `^\' quit character
rp str `^R' line retype character
rw bool false do NOT use raw for input, use
sp num unused line speed (input and output)
su str `^Z' suspend character
tc str none table continuation
to num 0 timeout (seconds)
tt str NULL terminal type (for environment)
ub bool false do unbuffered output (of prompts
uc bool false terminal is known upper case only
we str `^W' word erase character
xc bool false do NOT echo control chars as `^X'
xf str `^S' XOFF (stop output) character
xn str `^Q' XON (start output) character
If no line speed is specified, speed will not be altered from that which
prevails when getty is entered. Specifying an input or output speed will
override line speed for stated direction only.
Terminal modes to be used for the output of the message, for input of the
login name, and to leave the terminal set as upon completion, are derived
from the boolean flags specified. If the derivation should prove inade-
quate, any (or all) of these three may be overridden with one of the f0,
f1, or f2 numeric specifications, which can be used to specify (usually
in octal, with a leading '0') the exact values of the flags. Local (new
tty) flags are set in the top 16 bits of this (32 bit) value.
Should getty receive a null character (presumed to indicate a line break)
it will restart using the table indicated by the nx entry. If there is
none, it will re-use its original table.
Delays are specified in milliseconds, the nearest possible delay avail-
able in the tty driver will be used. Should greater certainty be de-
sired, delays with values 0, 1, 2, and 3 are interpreted as choosing that
particular delay algorithm from the driver.
The cl screen clear string may be preceded by a (decimal) number of mil-
liseconds of delay required (a la termcap). This delay is simulated by
repeated use of the pad character pc.
The initial message, and login message, im and lm may include the charac-
ter sequence %h or %t to obtain the hostname or tty name respectively.
(%% obtains a single '%' character.) The hostname is normally obtained
from the system, but may be set by the hn table entry. In either case it
may be edited with he. The he string is a sequence of characters, each
character that is neither '@' nor '#' is copied into the final hostname.
A '@' in the he string, causes one character from the real hostname to be
copied to the final hostname. A '#' in the he string, causes the next
character of the real hostname to be skipped. Surplus '@' and '#' char-
acters are ignored.
When getty execs the login process, given in the lo string (usually
``/usr/bin/login''), it will have set the environment to include the ter-
minal type, as indicated by the tt string (if it exists). The ev string,
can be used to enter additional data into the environment. It is a list
of comma separated strings, each of which will presumably be of the form
If a non-zero timeout is specified, with to, then getty will exit within
the indicated number of seconds, either having received a login name and
passed control to login, or having received an alarm signal, and exited.
This may be useful to hangup dial in lines.
Output from getty is even parity unless op is specified. The op string
may be specified with ap to allow any parity on input, but generate odd
parity output. Note: this only applies while getty is being run, termi-
nal driver limitations prevent a more complete implementation. Getty
does not check parity of input characters in RAW mode.
login(1), termcap(5), getty(8).
The special characters (erase, kill, etc.) are reset to system defaults
by login(1). In all cases, '#' or '^H' typed in a login name will be
treated as an erase character, and '@' will be treated as a kill charac-
The delay stuff is a real crock. Apart form its general lack of flexi-
bility, some of the delay algorithms are not implemented. The terminal
driver should support sane delay settings.
The he capability is stupid.
The termcap format is horrid, something more rational should have been
The gettytab file format appeared in 4.2BSD.
4.2 Berkeley Distribution June 1, 1994 3