IPCONFIG(8) IPCONFIG(8)
NAME
ipconfig, arpd, rip - Internet configuration and routing
SYNOPSIS
ip/ipconfig [-abp] [-e etherdev] [-m ip-mask] [ipaddr]
ip/arpd [-pd] [-e etherdev] [-b bcast-addr]
ip/rip [-b]
DESCRIPTION
Ipconfig configures an Internet connection on an Ethernet. The options
are
a do not start arpd
b do not use BOOTP to discover a gateway address
p start arpd in promiscuous mode (see below)
e use the Ethernet mounted at /net/etherdev
m set the network mask to ip-mask
If ipaddr is specified on the command line, use that instead of one
found in the local database or via the BOOTP protocol.
Arpd performs the Internet Address Resolution Protocol, translating
Internet addresses into Ethernet addresses. It is normally started by
ipconfig. The options are
d print debugging to standard output
p (promiscuous) answer ARP requests for any recognized machine.
The default is to answer just for the machine running arpd.
e use the Ethernet mounted at /net/etherdev
b use the IP broadcast address bcast-addr instead of the correct
one.
Rip runs the routing protocol RIP. It listens for RIP packets on con-
nected networks and updates the kernel routing tables. The only
option, -b, broadcasts routing information onto the networks.
SOURCE
/sys/src/cmd/ip/ipconfig.c
/sys/src/cmd/ip/arpd.c
/sys/src/cmd/ip/rip.c
SEE ALSO
ndb(6)
IPCONFIG(8)
|
