VNCONFIG(8) BSD System Manager's Manual VNCONFIG(8)
vnconfig -- configure vnode disks
vnconfig [-crv] [-f disktab] [-t typename] vnode_disk regular_file
vnconfig -u [-Fv] vnode_disk
vnconfig -l [vnode_disk]
The vnconfig command configures vnode pseudo disk devices. It will asso-
ciate the vnode disk vnode_disk with the regular file regular_file allow-
ing the latter to be accessed as though it were a disk. Hence a regular
file within the filesystem can be used for swapping or can contain a
filesystem that is mounted in the name space. The vnode_disk is a spe-
cial file of raw partition or name of vnode disk like vnd0.
Options indicate an action to be performed:
-c Configures the device. If successful, references to vnode_disk
will access the contents of regular_file.
If geomspec is specified, the vnode device will emulate the spec-
ified disk geometry. The format of the geomspec argument is:
If geometry is not specified, the kernel will choose a default
based on 1MB cylinders. secsize is the number of bytes per sec-
tor. It must be an even multiple of 512. nsectors is the number
of sectors per track. ntracks is the number of tracks per cylin-
der. ncylinders is the number of cylinders in the device.
-F Force unconfiguration if the device is in use. Does not imply
Specifies that the -t option should look up in disktab instead of
-l List the vnd devices and indicate which ones are in use. If a
specific vnode_disk is given, then only that will be described.
If configuring the device, look up typename in /etc/disktab and
use the geometry specified in the entry. This option and the
geomspec argument are mutually exclusive.
-r Configure the device as read-only.
-u Unconfigures the device.
-v Print messages to stdout describing actions taken.
If no action option is given, -c is assumed.
vnconfig vnd0 /tmp/diskimage
vnconfig /dev/rvnd0c /tmp/diskimage
Configures the vnode disk vnd0. Please note that use of the second form
of the command is discouraged because it requires knowledge of the raw
partition which varies between architectures.
vnconfig vnd0 /tmp/floppy.img 512/18/2/80
Configures the vnode disk vnd0 emulating the geometry of 512 bytes per
sector, 18 sectors per track, 2 tracks per cylinder, and 80 cylinders
vnconfig -t floppy vnd0 /tmp/floppy.img
Configures the vnode disk vnd0 using the geometry specified in the floppy
entry in /etc/disktab.
vnconfig -u vnd0
Unconfigures the vnd0 device.
opendisk(3), vnd(4), mount(8), swapctl(8), umount(8)
The vnconfig command appeared in NetBSD 1.0.
This command should really be named vndconfig.
BSD March 28, 2003 BSD