Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (FreeBSD-5.4-RELEASE)
Apropos / Subsearch:
optional field

MDCONFIG(8)               BSD System Manager's Manual              MDCONFIG(8)

     mdconfig -- configure and enable memory disks

     mdconfig -a -t type [-n] [-o [no]option] ... [-f file] [-s size]
              [-S sectorsize] [-u unit] [-x sectors/track] [-y heads/cyl]
     mdconfig -d -u unit
     mdconfig -l [-n] [-u unit]

     The mdconfig utility configures and enables md(4) devices.

     Options indicate an action to be performed:

     -a      Attach a memory disk.  This will configure and attach a memory
             disk with the parameters specified and attach it to the system.

     -d      Detach a memory disk from the system and release all resources.

     -t type
             Select the type of the memory disk.

             malloc   Storage for this type of memory disk is allocated with
                      malloc(9).  This limits the size to the malloc bucket
                      limit in the kernel.  If the -o reserve option is not
                      set, creating and filling a large malloc-backed memory
                      disk is a very easy way to panic a system.

             vnode    A file specified with -f file becomes the backingstore
                      for this memory disk.

             swap     swapspace is used to back this memory disk.

     -f file
             Filename to use for the vnode type memory disk.

     -l      List information about configured md(4) devices.  If the -u
             option is used in conjuction with this, the output is limited to
             information on the specified device.

     -n      When printing md device names, print only the unit number without
             the md prefix.

     -s size
             Size of the memory disk.  Size is the number of 512 byte sectors
             unless suffixed with a k, m, or g which denotes kilobyte,
             megabyte and gigabyte respectively.

     -S sectorsize
             Sectorsize to use for malloc backed device.

     -x sectors/track
             See the description of the -y option below.

     -y heads/cylinder
             For malloc or vnode backed devices, the -x and -y options can be
             used to specify a synthetic geometry.  This is useful for con-
             structing bootable images for later download to other devices.

     -o [no]option
             Set or reset options.

                     For vnode backed devices: avoid IO_SYNC for increased
                     performance but at the risk of deadlocking the entire

                     Allocate and reserve all needed storage from the start,
                     rather than as needed.

                     Enable clustering on this disk.

                     Enable/Disable compression features to reduce memory

                     Disable/Enable extra sanity checks to prevent the user
                     from doing something that might adversely affect the sys-

                     Enable/Disable readonly mode.

     -u unit
             Request a specific unit number for the md(4) device instead of
             automatic allocation.

     To create a 4 megabyte malloc(9) backed memory disk.  The name of the
     allocated unit will be output on stdout like ``md3'':

           mdconfig -a -t malloc -s 4m

     To create a disk named /dev/md4 with /tmp/boot.flp as backing:

           mdconfig -a -t vnode -f /tmp/boot.flp -u 4

     To detach and free all resources used by /dev/md4:

           mdconfig -d -u 4

     To create and mount a 128MByte swap backed file system on /tmp:

           mdconfig -a -t swap -s 128M -u 10
           newfs -U /dev/md10
           mount /dev/md10 /tmp
           chmod 1777 /tmp

     To create a 5MB file-backed disk:

           dd if=/dev/zero of=somebackingfile bs=1k count=5k
           mdconfig -a -t vnode -f somebackingfile -u 0
           bsdlabel -w md0 auto
           newfs md0c
           mount /dev/md0c /mnt

     md(4), bsdlabel(8), fdisk(8), mdmfs(8), malloc(9)

     The mdconfig utility first appeared in FreeBSD 5.0 as a cleaner replace-
     ment for the vn(4) and vnconfig(8) combo.

     The mdconfig utility was written by Poul-Henning Kamp <phkATFreeBSD.org>.

BSD                             March 10, 2004                             BSD