Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (OpenBSD-3.6)
Apropos / Subsearch:
optional field

TOKENADM(8)             OpenBSD System Manager's Manual            TOKENADM(8)

     activadm, cryptoadm, snkadm - manage the ActivCard, CRYPTOCard and
     SNK-004 token databases

     tokenadm [-1BDERT] [-d] [-e] [-m [-]mode] [-r] [user [...]]

     The tokenadm utility displays and edits user entries in the various token
     databases.  It may also be invoked as one the following: activadm,
     cryptoadm, or snkadm.

     The options are as follows:

     -1      Display users, one per line.

     -B      Display users with no banner.

     -D      Display disabled users.

     -E      Display enabled users.

     -R      Display users in reverse order.

     -T      Display users in terse format (only the user names).  Unless -1
             is also specified, four users will be displayed per line.

     -d      Disable users without removing them from the database.  This pre-
             vents the users from authenticating, but does not lose their
             shared secret.  The -m flag may also be used with the -d flag.

     -e      Enable users.  This should be used to re-enable users who were
             disabled by the -d flag.  The -m flag may also be used with the
             -e flag.

     -m      Add [or remove] the specified mode of authentication for the us-
             er.  Modes available are decimal (dec), hexadecimal (hex), phone-
             book (phone), and reduced-input (rim).  Not all modes are avail-
             able for all types of cards.  The -m flag may be used alone or in
             conjunction with either the -d or -e flags.  Whenever reduced-in-
             put mode is set the reduced-input state is reset.  This should be
             done if a paper copy of challenge/responses had been produced and
             then misplaced.

     -r      Remove users from the database.

     Use of any of the -1BDERT flags precludes the use of any of the -demr
     flags.  The -demr flags all require at least one user argument.

     x99token(1), login.conf(5), login_token(8), tokeninit(8)

OpenBSD 3.6                     August 23, 1996                              1