timedc - Controls the timed daemon
timedc [command argument...]
The timedc program (timed control program) controls the operation of the
timed daemon. The timedc program can be used to perform the following
+ Measure the differences between machines' clocks.
+ Find the location of the master time server.
+ Enable or disable tracing of messages received by the timed daemon.
Without any operands, timedc prompts for commands from the standard input.
If operands are supplied, timedc interprets the first operand as a command
and the remaining operands as arguments to that command. The standard
input may be redirected, causing timedc to read operands from a file.
The timedc commands can be abbreviated. The following is a list of recog-
? [command ...]
help [command ...]
Prints a short description of each command specified in the argument
list, or, if no arguments are given, prints a list of the recognized
clockdiff host ...
Computes the differences between the clock of the host machine and
the clocks of the machines given as arguments. This command is only
valid for machines whose clocks are within 12 hours of the host
machine clock. Machines whose clocks are more than 12 hours dif-
ferent from the host machine clock will report incorrect time
trace on | off
Enables or disables the tracing of incoming messages to timed in
the /var/adm/timed.log file.
quit Exits from timedc.
msite Reports the hostname of the master timed server that is in use.
Full program path
Tracing file for the local timed daemon
Log file for the master timed server
Commands: date(1), timed(8)