Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (Debian-3.1)
Apropos / Subsearch:
optional field

RLOGIND(8)                BSD System Manager's Manual               RLOGIND(8)

     rlogind -- remote login server

     rlogind [-afhlLn]

     Rlogind is the server for the rlogin(1) program.  The server provides a
     remote login facility with authentication based on privileged port num-
     bers from trusted hosts.

     Options supported by rlogind:

     -a      This option exists for compatibility with historical systems.

     -f      Disable the Nagle algorithm.  This is only needed to work around
             some broken operating systems.

     -h      Permit use of superuser ``.rhosts'' files.

     -l      Prevent any authentication based on the user's ``.rhosts'' file.
             If the user is logging in as the superuser and the -h option is
             used, ``.rhosts'' processing is still enabled.

     -L      Prevent any authentication based on ``.rhosts'' or
             ``hosts.equiv'' information.

     -n      Disable keep-alive messages.

     The -h, -l, and -L flags are not used if PAM (Pluggable Authentication
     Module) support is in use.

     The -h and -l options should also not be trusted without verifying that
     they work as expected with the particular version of libc installed on
     your system (and should be tested again after any libc update) because
     some versions of libc may not honor the internal flags used by rlogind.
     As the -L option bypasses the libc functions entirely, it is not subject
     to this problem.

     Also note that the design of the .rhosts system is COMPLETELY INSECURE
     except on a carefully firewalled private network. Always use the -L
     option under all other circumstances. Also, since rlogind does not
     encrypt communications, it should not, in general, be used at all. Con-
     sider ssh(8).

     Rlogind listens for service requests at the port indicated in the
     ``login'' service specification; see services(5).  When a service request
     is received the following protocol is initiated:

     1.   The server checks the client's source port.  If the port is not in
          the range 512-1023, the server aborts the connection.

     2.   The server checks the client's source address and requests the cor-
          responding host name (see gethostbyaddr(3), hosts(5) and named(8)).
          If the hostname cannot be determined, the dot-notation representa-
          tion of the host address is used.  The addresses for the hostname
          are requested, verifying that the name and address correspond.  Nor-
          mal authentication is bypassed if the address verification fails.

     Once the source port and address have been checked, rlogind proceeds with
     the authentication process described in rshd(8).  It then allocates a
     pseudo terminal (see pty(4)), and manipulates file descriptors so that
     the slave half of the pseudo terminal becomes the stdin, stdout, and
     stderr for a login process.  The login process is an instance of the
     login(1) program, invoked with the -f option if authentication has suc-
     ceeded.  If automatic authentication fails, the user is prompted to log
     in as if on a standard terminal line.

     The parent of the login process manipulates the master side of the pseudo
     terminal, operating as an intermediary between the login process and the
     client instance of the rlogin program.  In normal operation, the packet
     protocol described in pty(4) is invoked to provide '^S/^Q' type facili-
     ties and propagate interrupt signals to the remote programs.  The login
     process propagates the client terminal's baud rate and terminal type, as
     found in the environment variable, 'TERM'; see environ(7).  The screen or
     window size of the terminal is requested from the client, and window size
     changes from the client are propagated to the pseudo terminal.

     Transport-level keepalive messages are enabled unless the -n option is
     present.  The use of keepalive messages allows sessions to be timed out
     if the client crashes or becomes unreachable.

     All initial diagnostic messages are indicated by a leading byte with a
     value of 1, after which any network connections are closed.  If there are
     no errors before login is invoked, a null byte is returned as in indica-
     tion of success.

     Try again.
             A fork by the server failed.

     login(1), ruserok(3), rshd(8)

     The authentication procedure used here assumes the integrity of each
     client machine and the connecting medium.  This is insecure, but is use-
     ful in an ``open'' environment.

     A facility to allow all data exchanges to be encrypted should be present.

     A more extensible protocol should be used.

     The rlogind command appeared in 4.2BSD.

Linux NetKit (0.17)             March 16, 1991             Linux NetKit (0.17)