Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (NetBSD-6.1.5)
Apropos / Subsearch:
optional field

CNWCTL(8)                   System Manager's Manual                  CNWCTL(8)

     cnwctl -- display statistics and control Netwave AirSurfer PC Cards

     cnwctl [-d domain] [-i interface] [-k scramble-key] [-sS [rate]]

     The cnwctl utility is used to control Netwave AirSurfer PC Cards as well
     as display statistics.  The following options are available:

     -d      Set the domain of the card to domain.  The domain must be between
             0x000 and 0x1ff.  The domains 0x000 through 0x0ff are for access
             to an add-hoc network.  The domains 0x100 through 0x1ff are for
             access to a Netwave Access Point.  The default domain is 0x000.
             A card may only talk to the access point in its domain, or other
             cards in its add-hoc domain.

     -i      Use interface as the interface rather than cnw0.

     -k      Set the scramble key to scramble-key.  The scramble key must be
             between 0x0000 and 0xffff.  Both the source and the destination
             must use the same scramble key in order to communicate.

     -s      Display statistics.  When the optional argument rate (which must
             be the last argument to the end of the command line) is specified
             as a non-zero value, statistics will be displayed every rate
             seconds.  At the top of each ``page'' of statistics, column
             labels will be displayed.  The first row of statistics will be
             totals since boot, subsequent lines are deltas from the previous
             row.  If rate is not specified, or is 0 (zero), a single page of
             statistics will be displayed.  These statistics are more detailed
             and include:

             domain  The domain this card is part of.

             rx      Number of packets received.

                     Number of overflows detected.

                     Number of overruns detected.

                     Number of CRC errors detected.  Random noise can cause
                     these errors.

                     Number of framing errors detected.

                     Number of generic errors detected.

                     Number of times a packet was available.

             tx      Number of packets requested to be sent.

             txokay  Number of packets sent.

                     Number of packets aborted (not sent within 9 tries).

                     Number of times carrier detect was lost.

                     Number of generic transmit errors detected.

                     Total number of retries.

             Nx retries
                     Number of packets which were retried N times.

     -S      Display status read from the hardware.  This option is only
             available to the super user.  The rate argument is used as with
             the -s option.  The following fields are displayed

             link integrity field (lif)
                     A 0 value implies no links.

             connection quality (cq)
                     Probably indicates the quality of the connection to the
                     access point.

             spu     Unknown meaning.

             link quality (lq)
                     Probably indicated the quality of the link to the access

             hhc     Unknown meaning.

             mhs     Unknown meaning.

                     The revision numbers of the card.

             id      The ID of the card.


NetBSD 6.1.5                    January 5, 1997                   NetBSD 6.1.5