Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (OSF1-V5.1-alpha)
Apropos / Subsearch:
optional field

Thread(5)							    Thread(5)


  Thread, ThreadExcludeObj, ThreadExcludeProc, ThreadExitCall, ThreadFork-
  Call,	ThreadGetId, ThreadIsInternal, ThreadTableInit,	ThreadTableLock,
  ThreadTableUnlock, ThreadTableFree, ThreadLookup, ThreadUnlock,
  ThreadRemove,	ThreadForeach, ThreadMutexPoll,	ThreadMutexLock, ThreadMutex-
  Unlock, ThreadAddr, ThreadLockedAdd -	Atom services used to develop
  Thread-safe analysis routines


  The following	interfaces are defined for use by Atom instrumentation rou-

  #include <&lt;cmplrs/atom.inst.h>&gt;

  int ThreadExcludeObj(
	  Obj *object,
	  unsigned long	i_flags	);

  int ThreadExcludeProc(
	  Obj *object,
	  Proc *procedure,
	  unsigned long	i_flags	);

  int ThreadExitCall(
	  Obj *object,
	  unsigned long	i_flags,
	  const	char *exit_routine_name	);

  int ThreadForkCall(
	  Obj *object,
	  unsigned long	i_flags,
	  const	char *pre_fork_routine_name,
	  const	char *post_fork_routine_name );

  The following	interfaces are defined for use by Atom analysis	routines:

  #include <&lt;cmplrs/atom.anal.h>&gt;

  ThreadId ThreadGetId(
	  void );

  int ThreadIsInternal(
	  ThreadId id );

  ThreadTable *ThreadTableInit(
	  unsigned long	size_hint,
	  unsigned long	info_size );

  ThreadStatus ThreadTableLock(
	  ThreadTable *table,
	  ThreadId id );

  void ThreadTableUnlock(
	  ThreadTable *table,
	  ThreadId id );

  void ThreadTableFree(
	  ThreadTable *table );

  void *ThreadLookup(
	  ThreadTable *table,
	  ThreadId id,
	  unsigned long	a_flags	);

  ThreadStatus ThreadUnlock(
	  ThreadTable *table,
	  ThreadId id );

  ThreadStatus ThreadRemove(
	  ThreadTable *table,
	  ThreadId id );

  ThreadStatus ThreadForeach(
	  ThreadTable *table,
	  ThreadId id,
	  unsigned long	a_flags,
	  void *data,
	  void *result,
	  void (*proc)(ThreadId,void *,void *,void *) );

  void ThreadMutexPoll(
	  int microseconds );

  ThreadStatus ThreadMutexLock(
	  ThreadMutex *mutex,
	  ThreadId id );

  void ThreadMutexUnlock(
	  ThreadMutex *mutex );

  ThreadMutex *ThreadAddr(
	  ThreadTable *table,
	  ThreadId id );

  unsigned long	ThreadLockedAdd(
	  unsigned long	*counter,
	  unsigned long	increment );


      An instrumentation time object file that has been	built but not yet

      Options to control the instrumentation-time services. The	same value
      may be passed to all such	routines that use it. The value	is a
      bitwise-OR (|) of	the following:

      THREAD_PTHREAD = application calls pthread_* routines
      THREAD_FORK	 = application may fork
      THREAD_FLOAT	= analysis routines use	floating-point

      An instrumentation time procedure	pointer.

      The name of an analysis routine that is to be called just	before a
      thread terminates.

      The name of an analysis routine that is to be called just	before a
      fork(2) or vfork(2) system call.

      The name of an analysis routine that is to be called just	after a
      fork(2) or vfork(2) system call; it will be called in both the parent
      and the child process.

      Suggested	number of threads that the thread table	typically needs	to

      Number of	bytes of data that the thread table needs to allocate per

      Pointer to a thread table	previously allocated by	calling	ThreadTa-

  id  Unique identification number for a thread, as provided by

      If a_flags has the value THREAD_LOCK, a mutex will be claimed, to	seri-
      alize access to the data for the current thread; ThreadUnlock must be
      called to	release	the mutex after	use.

      A	pointer	to any data that the tool needs	to pass	to the iteration
      callback function	"proc" in its third argument.

      A	pointer	to any data that the tool needs	to get back from the itera-
      tion callback function "proc" via	its fourth argument.

      Procedure	to be called for each thread that has data in the specified
      thread table. It should return non-zero if the iteration must stop,
      zero if it must continue.

      A	mutual-exclusion lock, which contains the value	ThreadNoId if no
      thread holds the lock, or	which contains the identification number of
      the thread that does hold	it.

      Any unsigned long	variable.

      Any unsigned long	value.


  Atom's Thread* routines help you write thread-safe analysis routines,	for
  applications that use	pthread_create and other DECthreads services.

  Instrumentation Services

  The ThreadExcludeObj routine returns a non-zero value	if the procedures of
  the specified	object can not be safely instrumented with calls to analysis
  routines. If ThreadExcludeObj	returns	a non-zero value, the specified
  object may only be instrumented via ThreadExitCall or	ThreadForkCall.

  The ThreadExcludeProc	routine	returns	a non-zero value if the	specified
  procedure can	not be safely instrumented, in much the	same way that
  ThreadExcludeObj excludes whole objects.  This routine acts as a more
  fine-grained filter for procedures in	shared-libraries, and it takes over
  from ThreadExcludeObj	programs that were linked with archive libraries.

  The ThreadExitCall routine instruments the specified object with a call to
  the named analysis routine at	the point where	the current thread is just
  about	to terminate, if this is the object containing that point.  ThreadEx-
  itCall returns a non-zero value if a call to the analysis routine was
  inserted.  The analysis routine must be defined with no arguments in a
  preceding AddCallProto call.	If ThreadExitCall does insert a	call, the
  object needs to be written out even if ThreadExcludeObj indicates that it
  should not be	instrumented in	general.  A tool need not instrument the
  thread-termination point if it has no	need to	do so. A typical use of	a
  thread-termination analysis routine is to write out a	per-thread data	file
  and free any per-thread analysis data.  See the prof example referenced in
  the FILES section.

  The ThreadForkCall routine instruments the specified object with calls to
  the named analysis routines before and after any fork(2) or vfork(2)
  system-call instruction (usually in libc).  ThreadForkCall returns a non-
  zero value if	calls to the analysis routines were inserted. The analysis
  routines must	be defined with	no arguments in	a preceding AddCallProto
  call.	If any analysis	routines in the	tool claim mutexes, the	fork analysis
  routines need	to unlock the mutexes in order to avoid	deadlock in the	child
  process. See the prof	example	referenced in the FILES	section.

  Run-Time Analysis Services

  The analysis routines	of an Atom tool	can not	call pthread_* routines,
  because only one copy	of the libpthread library can be in control of a pro-
  cess.	So, the	Thread*	routines provided by Atom's analysis-services library
  provide routines that	support	mutexes	without	using libpthread. Services
  for analyzing	threads	individually (for example, per-thread profiles)	are
  also provided	by this	Atom library.

  The ThreadGetId routine returns the unique identification number for the
  thread that is executing this	code. The value	ThreadNoId is returned if the
  current thread is one	of the internal	threads	of the pthread library.

  The ThreadIsInternal routine returns a non-zero value	if the given thread
  id is	that of	a thread-management thread created within DECthreads. Such
  threads are usually not profiled.

  The ThreadTableInit routine allocates	and initializes	a table	that records
  info_size bytes of per-thread	data on	any number of threads. A pointer to
  the data for a given thread is returned by calling ThreadLookup with the id
  of the thread. The first time	ThreadLookup is	called for a thread, its data
  is allocated and set to zero,	unless the THREAD_EXISTING flags value is
  specified to prevent allocation for that call.  ThreadLookup may become
  progressively	less efficient as the number of	threads	known to the table
  exceeds the size_hint	specified when the table was allocated with ThreadTa-

  ThreadLookup claims a	mutex if the THREAD_LOCK flags value is	specified;
  this is necessary when Atom analysis routines	are profiling threads indivi-
  dually, but not if the table is being	used in	a non-threaded program (such
  as one that monitors threaded	programs with the /proc	file system).
  ThreadUnlock must be called to release the mutex after the thread has	fin-
  ished	modifying its per-thread data. Note that the table may use one mutex
  to serialize access to more than one thread; optimally, each thread's	data
  will have its	own mutex, but this cannot be relied on.

  The ThreadRemove routine breaks the connection between the thread id and
  its data in the thread table,	for example when a thread terminates.
  THREAD_NO_DATA is returned if	no data	was found for the specified thread.
  If other code	uses the THREAD_LOCK flags value to lock the table's per-
  thread data, then ThreadRemove must be called	between	calls to ThreadLookup
  (with	THREAD_LOCK specified) and ThreadUnlock.

  The ThreadForeach routine calls the specified	procedure for every thread
  known	to the table, in no particular order. The callback procedure must
  return zero to continue the iteration, or non-zero to	stop it.

  The ThreadTableLock routine locks every current and future thread associ-
  ated with the	table, or it locks none	if any was already locked by the cal-
  ling thread.	The ThreadTableUnlock routine unlocks every thread known to
  the table, except for	threads	that are locked	by the calling thread. These
  routines can be used to safeguard mutexes when an instrumented application
  calls	fork().

  The ThreadTableFree routine deallocates the memory used by the table.	You
  must ensure that no thread is	currently using	the table or will use it.

  The ThreadMutexPoll routine sets the period for which	ThreadMutexLock	and
  ThreadLookup will sleep, between attempts to claim a mutex. Periods of zero
  to 999999 microseconds are supported.	If a negative period is	specified
  (and by default), ThreadMutexLock adopts a repeating and varying schedule
  of intervals from 1 to 512K microseconds.

  The ThreadMutexLock routine claims the specified mutex lock, in particular
  a mutex that is not within a ThreadTable. New, independent mutexes can sim-
  ply be defined with a	static or initialized declaration. For example:

       ThreadMutex global_mutex	= ThreadNoId;

  ThreadMutexLock repeatedly polls and waits (with usleep()) until the claim
  is successful, when zero is returned.	 THREAD_NO_ID is returned if the
  specified thread id is ThreadNoId, and THREAD_LOCKED is returned if the
  specified thread already holds the mutex lock. A memory barrier instruction
  is executed after the	mutex is claimed, so the program delays	until all
  store	instructions have completed, so	the critical section will be safe in
  a Symmetric Multi-Processor (SMP) system. The	ThreadMutexLock	routine	is
  too intrusive	when the procedures in some system libraries are instru-
  mented, because it calls usleep; so, it should not be	used in	objects	for
  which	ThreadExcludeObj returns a non-zero value or in	procedures for which
  ThreadExcludeProc returns a non-zero value. The pthread_mutex_lock(3)	rou-
  tine and the pthread_mutex_t type mutexes it supports	should not be used in
  analysis routines; neither should any	other pthread_*	routines.

  The ThreadMutexUnLock	routine	releases the specified mutex lock and exe-
  cutes	a memory barrier to end	the critical section.

  The ThreadAddr routine returns the address of	the mutex that protects	the
  per-thread data for the specified thread id in the specified table.

  The ThreadLockedAdd routine provides a thread-safe, SMP-safe,	add opera-
  tion.	It returns the value that the counter had before the addition. By
  casting to and from signed types, signed (for	example, negative) values and
  subtraction can be achieved. It ensures that attempts	to increment the
  counter are serialized. When an Atom tool's analysis routine only needs to
  increment one	counter	(or a set of counters that can be allowed to become
  out of sync),	use of this procedure lets you avoid the need for the more
  complex, slower, and more intrusive mutex locks around critical sections.
  For example, it can be used for simple analysis of objects that ThreadEx-
  cludeObj identifies as unsafe	for analysis with the other Thread* services.


  A NULL pointer, the null thread id ThreadNoId, or a non-zero ThreadStatus
  error	code indicates failure (or true	for logical functions),	as described


      Header file containing external definitions of Atom instrumentation

      Header file containing external definitions of Atom analysis routines

      Annotated	example	sources	for a simple Atom tool that demonstrates a
      use of Atom's Thread routines to support analysis	of applications	that
      fork and handle signals in either	a threaded or a	non-threaded environ-


  Commands: atom(1)

  AtomTools: hiprof(5),	pixie(5), third(5)

  Functions: atom_application_instrumentation(5),
  atom_application_navigation(5), atom_application_resolvers(5),
  atom_application_query(5), atom_description_file(5),
  atom_object_management(5), atom_instrumentation_routines(5), AnalHeap-
  Base(5), Xlate(5)

  Programmer's Guide