SBP(4) Kernel Interfaces Manual SBP(4)
sbp -- Serial Bus Protocol 2 (SBP-2) Mass Storage Devices driver
sbp* at ieee1394if? euihi ? euilo ?
The sbp driver provides support for SBP-2 devices that attach to the
IEEE1394 port. It should work with all SBP-2 devices which the scsi(4)
layer supports, for example, HDDs, CDROM drives, and DVD drives.
Some users familiar with umass(4) might wonder why the device is not
detached at the scsi(4) layer when the device is unplugged. It is
detached only if the device has not been plugged again during several bus
resets. This is for preventing to detach an active file system even when
the device cannot be probed correctly for some reason after a bus reset
or when the device is temporary disconnected because the user changes the
bus topology. If you want to force to detach the device, run fwctl -r
ieee1394if(4), scsi(4), fwctl(8), scsictl(8), sysctl(8)
The sbp driver was written by Katsushi Kobayashi and Hidetoshi Shimokawa.
This manual page was written by Katsushi Kobayashi. It was added to
NetBSD 4.0 by KIYOHARA Takashi.
NetBSD 6.1.5 June 18, 2005 NetBSD 6.1.5