PDCIDE(4) Kernel Interfaces Manual PDCIDE(4)
pdcide -- Promise IDE disk controllers driver
pdcide* at pci? dev ? function ? flags 0x0000
The pdcide driver supports the Promise Ultra33, Ultra66, Ultra100,
Ultra100TX2, Ultra100TX2v2, Ultra133, Ultra133TX2, Ultra133TX2v2,
Fasttrak133 and Serial ATA/150 IDE controllers, and provides the
interface with the hardware for the ata(4) driver.
The 0x0002 flag forces the pdcide driver to disable DMA on chipsets for
which DMA would normally be enabled. This can be used as a debugging
aid, or to work around problems where the IDE controller is wired up to
the system incorrectly.
ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)
The timings used for the PIO and DMA modes for controllers listed above
are for a PCI bus running at 30 or 33 MHz. This driver may not work
properly on overclocked systems.
The pdcide driver does NOT function correctly on NetBSD/sparc64.
NetBSD 6.1.5 December 23, 2003 NetBSD 6.1.5