LII(4) BSD Kernel Interfaces Manual LII(4)
lii -- Attansic L2 10/100 Ethernet device
lii* at pci?
atphy* at mii?
The lii driver provides support for Ethernet interfaces based on the
Attansic L2 Ethernet chipset.
The lii driver supports the following media types:
Enable autoselection of the media type and options. The user
can manually override the autoselected mode by adding media
options to the appropriate hostname.if(5) file.
10baseT Set 10Mbps operation. The ifconfig(8) mediaopt option can
also be used to select either full-duplex or half-duplex
100baseTX Set 100Mbps (Fast Ethernet) operation. The ifconfig(8)
mediaopt option can also be used to select either full-duplex
or half-duplex modes.
The lii driver supports the following media options:
full-duplex Force full duplex operation.
half-duplex Force half duplex operation.
For more information on configuring this device, see ifconfig(8). To
view a list of media types and options supported by the card, try
ifconfig <<device>> media. For example, ifconfig lii0 media.
arp(4), atphy(4), ifmedia(4), intro(4), netintro(4), pci(4),
The lii device driver first appeared in OpenBSD 4.3.
The lii driver was written by Quentin Garnier.
BSD January 27, 2011 BSD