KUE(4) Kernel Interfaces Manual KUE(4)
kue -- Kawasaki LSI KL5KUSB101B USB Ethernet driver
kue* at uhub?
The kue driver supports the following adapters:
3Com 3c460 HomeConnect Ethernet USB Adapter
ADS Technologies USB-10BT
I/O Data USB-ET/T
Peracom USB Ethernet Adapter (3 models)
The kue driver provides support for USB Ethernet adapters based on the
Kawasaki LSI KL5KLUSB101B chipset.
The KL5KLUSB101B supports a 128-entry multicast filter, single perfect
filter entry for the station address and promiscuous mode. Packets are
received and transmitted over separate USB bulk transfer endpoints.
The Kawasaki adapter supports only 10Mbps half-duplex mode, hence there
are no ifmedia(4) modes to select.
For more information on configuring this device, see ifconfig(8).
kue%d: watchdog timeout A packet was queued for transmission and a
transmit command was issued, however the device failed to acknowledge the
transmission before a timeout expired.
kue%d: no memory for rx list The driver failed to allocate an mbuf for
the receiver ring.
arp(4), netintro(4), usb(4), ifconfig(8)
The kue device driver first appeared in FreeBSD 4.0, and in NetBSD 1.5.
The kue driver was written by Bill Paul <wpaulATee.edu>.
The kue driver does not accumulate Ethernet collisions statistics because
the Kawasaki firmware does not appear to maintain any internal
NetBSD 6.1.5 January 4, 2000 NetBSD 6.1.5