unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (FreeBSD-5.4-RELEASE)
Page:
Section:
Apropos / Subsearch:
optional field

BFE(4)                   BSD Kernel Interfaces Manual                   BFE(4)

NAME
     bfe -- Broadcom BCM4401 Ethernet Device Driver

SYNOPSIS
     device miibus
     device bfe

DESCRIPTION
     The bfe driver provides support for Broadcom BCM4401 based Fast Ethernet
     adapters.

     The bfe driver supports the following media types:

     autoselect   Enable autoselection of the media type and options.

     10baseT/UTP  Set 10Mbps operation.

     100baseTX    Set 100Mbps (Fast Ethernet) operation.

     The bfe driver supports the following media options:

     full-duplex  Set full duplex operation.

     For further information on configuring this device, see ifconfig(8).

DIAGNOSTICS
     bfe%d: couldn't map memory  A fatal initialization error has occurred.

     bfe%d: couldn't map interrupt  A fatal initialization error has occurred.

     bfe%d: failed to allocate DMA resources  There are not enough mbufs
     available for allocation.

     bfe%d: watchdog timeout -- resetting  The device has stopped responding
     to the network, or there is a problem with the network connection
     (cable).

SEE ALSO
     arp(4), miibus(4), netintro(4), ng_ether(4), ifconfig(8)

HISTORY
     The bfe device driver first appeared in FreeBSD 5.1.

AUTHORS
     The bfe device driver was written by Stuart Walsh and Duncan Barclay.
     This manual page was written by Stuart Walsh.

BSD                            September 4, 2003                           BSD