unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (NetBSD-6.1.5)
Page:
Section:
Apropos / Subsearch:
optional field

ICP(4)                     Kernel Interfaces Manual                     ICP(4)

NAME
     icp -- ICP-Vortex and Intel Storage RAID driver

SYNOPSIS
     icp* at pci? dev ? function ?
     ld* at icp? unit ?
     icpsp* at icp? unit ?
     scsibus* at icpsp?

DESCRIPTION
     The icp driver provides support for the newer (post 1997) ICP-Vortex GDT
     and Intel Storage RAID controllers.

     The ld driver provides access to logical devices (disk arrays) presented
     by the controller.  The icpsp driver provides direct access to other SCSI
     devices attached to the controller, such as tape or CD-ROM drives.

DIAGNOSTICS
     pci_mem_find: expected mem type 00000000, found 00000002   This message
                                                                may be
                                                                displayed
                                                                during
                                                                autoconfiguration
                                                                if the
                                                                controller's
                                                                memory is
                                                                mapped below
                                                                1MB in
                                                                physical
                                                                address space.
                                                                This can be
                                                                disabled
                                                                either through
                                                                changing a
                                                                setting in the
                                                                controller's
                                                                BIOS utility,
                                                                or changing
                                                                the position
                                                                of a jumper on
                                                                the board.
                                                                See your
                                                                controller's
                                                                documentation
                                                                for more
                                                                information.

SEE ALSO
     intro(4), ld(4), scsi(4)

HISTORY
     The icp driver first appeared in NetBSD 1.6, and was based on the FreeBSD
     and OpenBSD drivers of the same name.

BUGS
     ISA & EISA front-ends and a management interface are needed.

     Older PCI boards are not yet supported.

NetBSD 6.1.5                    April 20, 2002                    NetBSD 6.1.5