HME(4) BSD Kernel Interfaces Manual HME(4)
hme -- Sun Microelectronics STP2002-STQ Ethernet interfaces device driver
The hme driver supports Sun Microelectronics STP2002-STQ Fast Ethernet
The hme driver supports the on-board Ethernet interfaces of many Sun
UltraSPARC workstation and server models.
Cards supported by the hme driver include:
o Sun PCI SunSwift Adapter (``SUNW,hme'')
o Sun SBus SunSwift Adapter (``hme'' and ``SUNW,hme'')
o Sun PCI Sun100BaseT Adapter 2.0 (``SUNW,hme'')
o Sun SBus Sun100BaseT 2.0 (``SUNW,hme'')
o Sun PCI Quad FastEthernet Controller (``SUNW,qfe'')
o Sun SBus Quad FastEthernet Controller (``SUNW,qfe'')
On sparc64 the hme driver respects the local-mac-address? system configu-
ration variable which can be set in the Open Firmware boot monitor using
the setenv command or by eeprom(8). If set to ``false'' (the default),
the hme driver will use the system's default MAC address for all of its
devices. If set to ``true'', the unique MAC address of each interface is
used if present rather than the system's default MAC address.
Supported interfaces having their own MAC address include on-board ver-
sions on boards equipped with more than one Ethernet interface and all
add-on cards except the single-port SBus versions.
gem(4), intro(4), miibus(4), netintro(4), eeprom(8), ifconfig(8)
Sun Microelectronics, STP2002QFP Fast Ethernet, Parallel Port, SCSI
(FEPS) User's Guide, April 1996,
The hme driver first appeared in NetBSD 1.5. The first FreeBSD version
to include it was FreeBSD 5.0.
The hme driver was written by Paul Kranenburg <pkATNetBSD.org>.
BSD August 14, 2004 BSD