FMVJ18x_CS(4) Kernel Interfaces Manual FMVJ18x_CS(4)
fmvj18x_cs - Fujitsu FMV-J18x series device driver
insmod fmvj18x_cs.o [pc_debug=n] [fmvj18x_debug=n] [irq_list=i,j,...]
fmvj18x_cs is the low-level Card Services driver for the Fujitsu FMV-
J18x series PCMCIA ethernet adapter. When this driver is attached to a
card, it allocates the next available ethernet device (eth0..eth#).
This device name will be reported in the kernel log file, and passed on
Selects the PCMCIA debugging level. This parameter is only
available if the module is compiled with debugging enabled. A
non-zero value enables debugging.
Selects the network debugging level. The current default is 3;
values of up to six increase reporting verbosity.
Specifies the set of interrupts that may be allocated by this
This man page describes the standalone PCMCIA drivers provided by the
pcmcia-cs source, not the PCMCIA kernel driver support that is included
in the 2.4 (and later) linux kernel. While the kernel PCMCIA code has
the same functionality as the driver side of the standalone PCMCIA
package, there are some important differences. Therefore, some or all
of this documentation might not apply to the kernel drivers.
Shingo Fujimoto - Fujitsu Laboratories Ltd.
Yutaka TAMIYA - Fujitsu Laboratories Ltd.
Hideaki Yoda - Fujitsu Limited.
1999/02/08 08:02:01 FMVJ18x_CS(4)