CUE(4) BSD Kernel Interfaces Manual CUE(4)
cue -- CATC USB-EL1201A USB Ethernet device
cue* at uhub?
The cue driver provides support for USB Ethernet adapters based on the
Computer Access Technology Corporation's USB-EL1202A chipset. This
includes the following adapters:
CATC Netmate II
The USB-EL1202A supports a 512-bit multicast hash filter, single perfect
filter entry for the station address and promiscuous mode. Packets are
received and transmitted over separate USB bulk transfer endpoints.
The CATC adapter supports only 10Mbps half-duplex mode, hence there are
no ifmedia(4) modes to select.
For more information on configuring this device, see ifconfig(8).
cue0: watchdog timeout A packet was queued for transmission and a trans-
mit command was issued, however the device failed to acknowledge the
transmission before a timeout expired.
cue0: no memory for rx list The driver failed to allocate an mbuf for
the receiver ring.
arp(4), intro(4), netintro(4), usb(4), hostname.if(5), ifconfig(8)
The cue device driver first appeared in FreeBSD 4.0. OpenBSD support was
added in OpenBSD 2.7.
The cue driver was written by Bill Paul <firstname.lastname@example.org> and
ported to OpenBSD by Aaron Campbell <email@example.com>.
BSD March 28, 2017 BSD