CUE(4) Kernel Interfaces Manual CUE(4)
cue -- CATC USB-EL1201A USB Ethernet driver
cue* at uhub?
The cue driver supports the following adapters:
CATC Netmate II
The cue driver provides support for USB Ethernet adapters based on the
Computer Access Technology Corporation's USB-EL1202A chipset.
The USB-EL1202A supports a 512-bit multicast hash filter, single perfect
filter entry for the station address and promiscuous mode. Packets are
received and transmitted over separate USB bulk transfer endpoints.
The CATC adapter supports only 10Mbps half-duplex mode, hence there are
no ifmedia(4) modes to select.
For more information on configuring this device, see ifconfig(8).
cue%d: watchdog timeout A packet was queued for transmission and a
transmit command was issued, however the device failed to acknowledge the
transmission before a timeout expired.
cue%d: no memory for rx list The driver failed to allocate an mbuf for
the receiver ring.
arp(4), netintro(4), usb(4), ifconfig(8)
The cue device driver first appeared in FreeBSD 4.0, and in NetBSD 1.5.
The cue driver was written by Bill Paul <wpaulATee.edu>.
NetBSD 6.1.5 January 13, 2000 NetBSD 6.1.5