AHA152X_CS(4) Kernel Interfaces Manual AHA152X_CS(4)
aha152x_cs - Adaptec AHA-152X compatible PCMCIA device driver
insmod aha152x_cs.o [pc_debug=n] [irq_list=i,j,...] [host_id=n]
[reconnect=n] [parity=n] [synchronous=n] [reset_delay=n] [ext_trans=n]
aha152x_cs is the low-level Card Services driver for various PCMCIA
SCSI adapters that are compatible with the Adaptec AHA-152X host
adapter. These include the New Media Bus Toaster, the Adaptec
AHA-1460, and various other OEM cards.
Selects the PCMCIA debugging level. This parameter is only
available if the module is compiled with debugging enabled. A
non-zero value enables debugging.
Specifies the set of interrupts that may be allocated by this
Specifies the SCSI ID of the host adapter. The default host ID
Enables support for disconnect/reconnect, if non-zero. The
default is 1 (true).
Enables SCSI parity checking. The default is 1 (true).
Enables negotiation of synchronous SCSI transfers. The default
is 0 (false).
Specifies a delay for SCSI bus resets, in 10 millisecond inter-
vals. The default is 100.
Enables the ``extended translation'' scheme for partition tables
of drives larger than 1 GB.
This man page describes the standalone PCMCIA drivers provided by the
pcmcia-cs source, not the PCMCIA kernel driver support that is included
in the 2.4 (and later) linux kernel. While the kernel PCMCIA code has
the same functionality as the driver side of the standalone PCMCIA
package, there are some important differences. Therefore, some or all
of this documentation might not apply to the kernel drivers.
David Hinds - dahindsATusers.net
pcmcia-cs 2000/06/12 21:24:47 AHA152X_CS(4)