unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (HP-UX-11.11)
Page:
Section:
Apropos / Subsearch:
optional field



 dteststat(1M)						       dteststat(1M)




 NAME
      dteststat - display the results of disk testing, or cancel the test.

 SYNOPSIS
      dteststat [-D slot] [-?] array-id

      dteststat -D slot -c [-?] array-id

 DESCRIPTION
      dteststat displays the results of testing performed on the indicated
      disk in the disk array identified by array-id.  A test in progress can
      also be canceled using dteststat.	 Disk testing is initiated using the
      drivetest command.

      The array-id used to address the disk array can be the disk array
      serial number, the character device file name of any LUN on the array
      (LUN 0 if no LUNs are created), or the alias text string assigned to
      the disk array.

    Options
      dteststat supports the following options:

	   none	     Display results for all disks being tested. Tests
		     results are shown for disks that have completed
		     testing, and progress is shown for tests still
		     underway.

	   -c	     Cancel the test currently in progress on the indicated
		     disk. A test can be canceled on only one disk at a
		     time, so the -D option must be included when canceling
		     a test.

	   -D slot   Display test results for the disk installed in the
		     cabinet slot identified by slot.  Slot numbers must be
		     of the form An or Bn, where A or B correspond to a
		     cabinet column, and n corresponds to a shelf position
		     (1-6).

	   -?	     Display expanded usage message. This option overrides
		     all others.

 EXTERNAL INFLUENCES
    Environment Variables
      LC_MESSAGES determines the language in which messages are displayed.
      The current language settings can be checked with locale(1).

 RETURN VALUE
      dteststat returns the following values:

	   0  Successful completion.




				    - 1 -	  Formatted:  August 2, 2006






 dteststat(1M)						       dteststat(1M)




	   1  An error in execution (I/O, subsystem, security, etc.)
	      occurred.
	   2  An error in command syntax occurred: for example, an unknown
	      command-line option was passed.
	   3  Timeout in communication to server. May indicate the ARMServer
	      is not running.

 DIAGNOSTICS
      The following messages can be generated by dteststat:

      Usage: dteststat [-D slot] [-c] array-id
	   An error in command syntax has occurred. Re-enter the command
	   with all necessary arguments.

      dteststat: Arg out of range
	   One of the arguments has exceeded its maximum or minimum size, or
	   is incorrect in form.  Check the size and form of each argument.

      dteststat: Unknown argument
	   An invalid argument was specified. Check command usage.

      dteststat: No such file or directory
	   The specified array-id does not exist or does not identify a disk
	   array that is communicating with the system.	 Verify the correct
	   array-id with ioscan(1M) or arraydsp(1M).

      dteststat: Error in command execution, <&lt&lt&lt;Additional Error Info>&gt&gt&gt;:
      <&lt&lt&lt;Error Info Decode>&gt&gt&gt;
	   The command failed due to a device error, an internal error, or a
	   system error. The Additional Error Info and Error Info Decode
	   fields will hold specifics about the failure and its cause.

      dteststat: Array was just powered-on or reset.
	   The command failed because the disk array has been powered-on or
	   reset. Reissue the command and it should succeed.

 EXAMPLES
      Display the results of the test performed on the disk installed in
      slot B3 of the disk array identified by device file /dev/rdsk/c2t0d0:

	   dteststat -D B3 /dev/rdsk/c2t0d0

      Display the results of the tests performed on all disks installed in
      the disk array identified by alias AUTORAID1:

	   dteststat AUTORAID1

      Cancel a test currently in progress on the disk installed in slot A1
      of disk array serial number 00786b5c0000:





				    - 2 -	  Formatted:  August 2, 2006






 dteststat(1M)						       dteststat(1M)




	   dteststat -D A1 -c 00786b5c0000

 DEPENDENCIES
      ARMServer must be running to execute this command. See ARMServer(1M).

 SECURITY CONFIGURATION
      This command is modified for all security configurations.

    Security Behavior/Restrictions
      Use of this command is restricted to authorized users only.

    Command Authorizations
      This command requires the sysadmin authorization to successfully
      execute.

    Privileges
      The command has been modified to support least privilege. The
      potential privileges possessed by the command and their uses include:

      allowdacread	  This privilege is raised to provide discretionary
			  read access to the devices.

      allowdacwrite	  This privilege is raised to provide discretionary
			  write access to the devices.

      allowmacread	  This privilege is raised to provide mandatory read
			  access to the devices.

      allowmacwrite	  This privilege is raised to provide mandatory
			  write access to the devices.

      filesysops	  This privilege is raised to allow the mknod(2)
			  system call to succeed.

      writeaudit	  The command generates its own audit records and
			  submits these directly to the system audit trail.
			  This privilege is raised whenever the command
			  needs to write an audit record.

 AUTHOR
      dteststat was developed by HP.

 SEE ALSO
      ARMServer(1M), arraycfg(1M), arraydsp(1M), arrayfmt(1M), arraylog(1M),
      arraymgr(1M), arrayrbld(1M), arrayrecover(1M), download(1M),
      drivetest(1M), logprint(1M).








				    - 3 -	  Formatted:  August 2, 2006