unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (HP-UX-11.11)
Page:
Section:
Apropos / Subsearch:
optional field



 diaglogd(1M)							diaglogd(1M)




 NAME
      diaglogd -  Support Tools Manager logging daemon


 SYNOPSIS
      /usr/sbin/stm/uut/bin/sys/diaglogd

 DESCRIPTION
      The Support Tools Manager (STM) uses a logging daemon ( diaglogd ) to
      read diagnostic events from the kernel via diag2 (diagnostic pseudo
      driver) and logs them in the system log files.

      diaglogd is launched automatically at boot by the STM daemon diagmond.
      The STM User Interface, xstm , mstm , or cstm , Daemon commands can
      also be used to launch the daemon as well as shut it down and view the
      daemon's activity log.

      The log files created by diaglogd can be viewed using the STM utility
      logtool.


 WARNINGS
      The following message will appear on the system console when the
      diagnostic logging facility determines that the I/O subsystem has
      started logging excessive I/O errors.  This message will appear only
      once and I/O errors will be lost until the diagnostic subsystem can
      recover from this condition.

       DIAGNOSTIC SYSTEM WARNING:
	 The diagnostic logging facility has started receiving excessive
	 errors from the I/O subsystem.	 I/O error entries will be lost
	 until the cause of the excessive I/O logging is corrected.
	 If the diaglogd daemon is not active, use the Daemon Startup
	 command in stm to start it. If the diaglogd daemon is active, use
	 the logtool utility in stm to determine which I/O subsystem is
	 logging excessive errors.

      The following message will appear on the system console when the cause
      of the excessive I/O error logging is corrected.	The total number of
      I/O errors that were dropped will be placed in "XX".

       DIAGNOSTIC SYSTEM WARNING:
	 The diagnostic logging facility is no longer receiving excessive
	 errors from the I/O subsystem.	 XX I/O error entries were lost.


 OTHER FILES
      /dev/diag/diag0 - Series 800 Diagnostic pseudo driver device file
      /dev/diag/diag1 - Series 700 Diagnostic pseudo driver device file
      /dev/diag/diag2 - Series 700/800 Diagnostic pseudo driver device file
      /var/stm/logs/sys/activity_log_diaglogd - Activity log of diaglogd



 Hewlett-Packard Company	    - 1 -		      HP-UX Release






 diaglogd(1M)							diaglogd(1M)




      /var/stm/logs/os/log##.raw - OS system log files
      /var/stm/logs/os/log##.raw.cur - Current OS system log file
      /var/stm/config/sys/diaglogd.cfg - Diagmond configuration
      /var/stm/data/daemon_list - List of daemons installed
      /var/stm/data/key_file - OS resource key file


 COPYRIGHT
      (c) Copyright 1995, Hewlett-Packard Company


 ORIGIN
      diaglogd was developed by Hewlett-Packard Company.


 SEE ALSO
      stm(1M), diagmond(1M)





































 Hewlett-Packard Company	    - 2 -		      HP-UX Release