unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (HP-UX-11.11)
Page:
Section:
Apropos / Subsearch:
optional field



 parstatus(1)							parstatus(1)




 NAME
      parstatus - display information about a hardware partitionable complex

 SYNOPSIS
      parstatus
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -s
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -w
	   [ -u username -h IPaddress|hostname]

      parstatus -X
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -C|-I [-A] [-M]
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -B|-P [-M]
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -i I/Ochassis [-i ...] [-M]
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -c cell [-c ...] [-V|-M]
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -b cabinet [-b ...] [-V|-M]
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

      parstatus -p PartitionNumber [-p ...] [-V|-M]
	   [ -u username -h IPaddress|hostname
	   | -g -h IPaddress|hostname ]

 DESCRIPTION
      The parstatus command displays information about a system complex.  If
      no arguments are supplied, all major components that are physically
      present in the local complex are listed.	A specific component (cell,
      I/O chassis, cabinet, or partition) may be specified in order to
      restrict the output to information about that component.	Either the
      -u option or the -g option can be specified to access a remote
      complex.



 Hewlett-Packard Company	    - 1 -      HP-UX 11i Version 1: Sep 2004






 parstatus(1)							parstatus(1)




      Please refer to the HP System Partitions Guide for a description of
      the partition management terms used in this man page.

    Remote Management Options
      The -u and -g options are available only if NParProvider and
      NPartition products are installed. The cplxmodify command is available
      only if NPartition product is installed.

    Options and Arguments
      parstatus recognizes the following command line options and arguments:

      -s	     Indicates if the command is being executed on a
		     hardware partitionable platform.  When this option is
		     specified, the command will either succeed or fail (see
		     RETURN VALUE below) and nothing will be displayed on
		     stdout or stderr.

      -u username    Specifies the required authorization to access a
		     partition other than the local partition (but can also
		     be used as a loopback access to the local partition).
		     If complex attributes are displayed, the complex is the
		     one in which this target partition resides.

		     The -h option is required if this option is used.

		     username specifies a configured user name on the target
		     partition. If -u username is specified, the command
		     will prompt for the password associated with the
		     username.

		     Note: This command is a Web-Based Enterprise Management
		     (WBEM) Client Application.	 The -u option accesses the
		     target partition using a Secure Sockets Layer (SSL)
		     connection.  If errors are reported, check that the
		     conditions described in the DEPENDENCIES section are
		     satisfied.

		     Note: If the commands are used in a script, the user
		     password must be passed in a secured way.	For example,

		     1. Save the user password in a variable and pass it to
			the command as,

			echo $passwd | parstatus -X -u username -h
			hostname/IP

		     2. Save the user password in a file and pass the file
			as input to the command like,

			parstatus -X -u username -h hostname/IP <&lt&lt&lt;
			passwd_file



 Hewlett-Packard Company	    - 2 -      HP-UX 11i Version 1: Sep 2004






 parstatus(1)							parstatus(1)




			Note, for security reason, protect the file that has
			the user password by removing read permissions for
			non-privileged users.

      -h IPaddress|hostname
		     This option should only be used in combination with
		     either the -u or -g option.  IPaddress|hostname
		     specifies the IP address or hostname of the target
		     partition (-u) or complex (-g).

      -g	     Allows access to the complex specified by the -h
		     option.  The accessed complex is then considered the
		     target complex.  Access is via the service processor's
		     LAN port.

		     The -h option is required if this option is used.

		     If -g is specified, the IPMI password of the service
		     processor should be passed when prompted.

		     If an error is reported when you attempt to connect
		     using this option, check to see that IPMI LAN access
		     has not been disabled on the remote service processor.
		     Access to the complex via IPMI over LAN can be enabled
		     or disabled by logging on to the service processor and
		     using the SA command from the Command Menu.

		     The -u and -g options are mutually exclusive.

		     Note: If the commands are used in a script, the IPMI
		     password must be passed in a secured way. For example,

		     1. Save the user password in a variable and pass it to
			the command as,

			echo $passwd | parstatus -X -g -h hostname/IP

		     2. Save the  user	password in a file and pass the file
			as input to the command like,

			parstatus -X -g -h hostname/IP <&lt&lt&lt; passwd_file

			Note, for security reason, protect the file that has
			the IPMI password by removing read permissions for
			non-privileged users.

      -w	     Display the local partition number in a full sentence.
		     If the -u option connects to another partition, that
		     partition number is reported instead.  The -M option
		     restricts the display to just the partition number.




 Hewlett-Packard Company	    - 3 -      HP-UX 11i Version 1: Sep 2004






 parstatus(1)							parstatus(1)




      -X	     Display the complex attributes.

      -A	     Only display the available resources in the complex.

      -V	     Verbose mode. Increase the amount of information
		     displayed.	 Additional information displayed with -V
		     includes:

		     For Cabinet:
		     * Status of each of the cabinet blower(s)
		     * Status of each of the I/O fan(s)
		     * Status of each of the bulk power supply(s)
		     * Status of each of the backplane power board(s)

		     For Partition:
		     * Primary, alternate and secondary boot path settings
		     * PDC, IODC version numbers
		     * Memory interleaving / local memory settings
		     * Cells summary info
		     * I/O chassis summary info

		     For Cell:
		     * Details of each cpu on the cell
		     * Details of memory on the cell
		     * Memory interleaving / local memory settings

      -M	     Produce a machine readable/parseable output, or
		     restrict the output of the -w option to a partition
		     number.  The machine readable output will have the
		     columns separated by a single colon character (:) and
		     will not have a column header.

      -C	     Show information for all cells in the complex.

      -I	     Show information for all I/O chassis in the complex.

      -B	     Show information for all cabinets in the complex.

      -P	     Show information for all partitions in the complex.

      -c cell	     Show information about the specified cell.	 The cell id
		     can be specified either in the local (cabinet#/slot#)
		     or global (cell_ID) format. For example, the cell
		     located in cabinet 0, slot 1 is locally identified as
		     0/1 or globally as 1.

      -i I/Ochassis  Show information about the specified I/Ochassis.  The
		     I/Ochassis id can be specified in the form of
		     cabinet#/enclosure#/chassis#.  For example, the I/O
		     chassis located in cabinet 0, enclosure 1 and I/O
		     chassis slot 3 is identified as 0/1/3.



 Hewlett-Packard Company	    - 4 -      HP-UX 11i Version 1: Sep 2004






 parstatus(1)							parstatus(1)




      -b cabinet     Show information about the specified cabinet.

      -p PartitionNumber
		     Show information about the specified partition.
		     PartitionNumber is the unique partition number
		     (integer) which was assigned to the partition when it
		     was created.

    Mapping of Global Cell Numbers to Local Cell Numbers
      The cabinets in a complex are numbered starting from 0.  The cell
      slots in each cabinet are also numbered starting from 0.	Each cabinet
      can have a maximum of 8 cells.  For example, the cells located in
      cabinet 0 will have the following cell numbers in global format: 0, 1,
      2, 3, 4, 5, 6, 7.	 The cell numbers in corresponding local format will
      be 0/0, 0/1, 0/2, 0/3, 0/4, 0/5, 0/6, 0/7.

      Similarly the cells located in cabinet 1 will have the following cell
      numbers in global format: 8, 9, 10, 11, 12, 13, 14, 15.  The cell
      numbers in corresponding local format will be 1/0, 1/1, 1/2, 1/3, 1/4,
      1/5, 1/6, 1/7.

      From the above convention the cell located in cabinet 1, slot 0 is
      identified in the local format as 1/0 or in the global format as 8.
      The parstatus(1) command will display the above cell as "cab1,cell0".
      The cell located in cabinet 1, slot 4 is identified in the local
      format as 1/4 or in the global format as 12.  The parstatus(1) command
      will display the above cell as "cab1,cell4".

 RETURN VALUE
      The parstatus command exits with one of the following values:

      0	   Successful completion.

      1	   Error condition occurred.

 EXAMPLES
    Example 1
      Display information for all the I/O chassis in the complex:

	   parstatus -I

      The output format is as shown below.

      [Chassis]
				       Core Connected  Par
      Hardware Location	  Usage	       IO   To	       Num
      =================== ============ ==== ========== ===
      cab0,bay0,chassis0  Absent       -    -	       -
      cab0,bay0,chassis1  Active       yes  cab0,cell0 0
      cab0,bay0,chassis2  Absent       -    -	       -
      cab0,bay0,chassis3  Active       yes  cab0,cell4 2



 Hewlett-Packard Company	    - 5 -      HP-UX 11i Version 1: Sep 2004






 parstatus(1)							parstatus(1)




      cab0,bay1,chassis0  Absent       -    -	       -
      cab0,bay1,chassis1  Active       yes  cab0,cell6 1
      cab0,bay1,chassis2  Absent       -    -	       -
      cab0,bay1,chassis3  Inactive     yes  cab0,cell2 1

    Example 2
      The following example displays information for all major components
      that are physically present in the local complex.	 No action is
      specified for the command; the default behaviour is to display all.

	   parstatus

      [Complex]
	 Complex Name : SuperDomeComplex
	 Complex Capacity
	   Compute Cabinet (8 cell capable) : 1
	 Active MP Location : cabinet 0
	 Model : 9000/800/SD32000
	 Original Serial Number : USR4001WXY
	 Current Product Order Number : 12345B
	 Original Manufacturer : HP
	 Complex Profile Revision : 1.0
	 The total number of partitions present : 3

      [Cabinet]
			Cabinet	  I/O	    Bulk Power	Backplane
			Blowers	  Fans	    Supplies	Power Boards
			OK/	  OK/	    OK/		OK/
      Cab		Failed/	  Failed/   Failed/	Failed/
      Num Cabinet Type	N Status  N Status  N Status	N Status       MP
      === ============	========= ========= ==========	============   ======
      0	  8 cell slot	4/0/N+	  5/0/NA    5/0/N+	3/0/N+	       Active

      Notes: N+ = There are one or more spare items (fans/power supplies).
	     N	= The number of items meets but does not exceed the need.
	     N- = There are insufficient items to meet the need.
	     ?	= The adequacy of the cooling system/power supplies is unknown.
	     HO = Housekeeping only; The power is in a standby state.
	     NA = Not Applicable.















 Hewlett-Packard Company	    - 6 -      HP-UX 11i Version 1: Sep 2004






 parstatus(1)							parstatus(1)




 [Cell]
			 CPU	 Memory				      Use
			 OK/	 (GB)			      Core    On
 Hardware   Actual	 Deconf/ OK/			      Cell    Next Par
 Location   Usage	 Max	 Deconf	  Connected To	      Capable Boot Num
 ========== ============ ======= ======== =================== ======= ==== ===
 cab0,cell0 Active Core	 4/0/4	 2/0	  cab0,bay0,chassis1  yes     yes  0
 cab0,cell1 Active Base	 2/0/4	 2/0	  -		      no      yes  2
 cab0,cell2 Inactive	 4/0/4	 2/0	  cab0,bay1,chassis3  yes     yes  1
 cab0,cell3 Inactive	 2/0/4	 2/0	  -		      no      -	   -
 cab0,cell4 Active Core	 2/0/4	 2/0	  cab0,bay0,chassis3  yes     yes  2
 cab0,cell5 Powered off	 0/0/4	 ?	  ?		      ?	      no   0
 cab0,cell6 Active Core	 2/0/4	 2/0	  cab0,bay1,chassis1  yes     yes  1
 cab0,cell7 Powering on	 0/0/4	 ?	  ?		      ?	      -	   -

 Notes: * = Cell has no interleaved memory.

 [Chassis]
				  Core Connected  Par
 Hardware Location   Usage	  IO   To	  Num
 =================== ============ ==== ========== ===
 cab0,bay0,chassis0  Absent	  -    -	  -
 cab0,bay0,chassis1  Active	  yes  cab0,cell0 0
 cab0,bay0,chassis2  Absent	  -    -	  -
 cab0,bay0,chassis3  Active	  yes  cab0,cell4 2
 cab0,bay1,chassis0  Absent	  -    -	  -
 cab0,bay1,chassis1  Active	  yes  cab0,cell6 1
 cab0,bay1,chassis2  Absent	  -    -	  -
 cab0,bay1,chassis3  Inactive	  yes  cab0,cell2 1


 [Partition]
 Par		  # of	# of I/O
 Num Status	  Cells Chassis	 Core cell  Partition Name (first 30 chars)
 === ============ ===== ======== ========== ===============================
 0   Active	  2	1	 cab0,cell0 cup2000
 1   Active	  3	2	 cab0,cell6 cup2006
 2   Active	  2	1	 cab0,cell4 cup2004

 DEPENDENCIES
      This command uses the Web-Based Enterprise Management (WBEM) product
      and certain of its configuration settings.  If you encounter
      connection errors when using the -u option, check that the following
      two conditions are satisfied:

      +	 Use the cimconfig(1M) command to verify (and correct if necessary)
	 the setting of the following two variables:

	 +  enableRemotePrivilegedUserAccess=true





 Hewlett-Packard Company	    - 7 -      HP-UX 11i Version 1: Sep 2004






 parstatus(1)							parstatus(1)




	 +  enableHttpsConnection=true

      +	 You must have appended the target partition's digital certificate
	 to the local partition's Trust Store file.  For the nPartition
	 commands, the Trust Store file is /opt/nparcmds/nparcmds.pem.

      Refer to the WBEM documents specified in the SEE ALSO section below
      for further information.

 AUTHOR
      parstatus was developed by the Hewlett-Packard Company.

 FILES
      /usr/sbin/	     The partition commands under this directory do
			     not provide remote management features.

      /usr/lib/npar/	     The partition commands under this directory
			     provide remote management feature. These
			     commands use the nPartition Provider product.

      /opt/nparprovider/lib/installed
			     The presence of this file indicates that
			     nPartition Provider is installed.

 SEE ALSO
      cplxmodify(1M), fruled(1), frupower(1M), parcreate(1M), parmgr(1M),
      parmodify(1M), parremove(1M), parunlock(1M), partition(5),

      HP System Partitions Guide on docs.hp.com,

      HP WBEM Services for HP-UX System Administrator's Guide on
      docs.hp.com,

      HP WBEM Services for HP-UX 11i v2.0 on Integrity Servers Version
      A.01.05 Release Notes on docs.hp.com.



















 Hewlett-Packard Company	    - 8 -      HP-UX 11i Version 1: Sep 2004