unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (HP-UX-11.11)
Page:
Section:
Apropos / Subsearch:
optional field



 pack(1)							     pack(1)




 NAME
      pack, pcat, unpack - compress and expand files

 SYNOPSIS
      pack [-] [-f] name ...

      pcat name ...

      unpack name ...

 DESCRIPTION
      pack attempts to store the specified files in a compressed form.
      Wherever possible, each input file name is replaced by a packed file
      name.z with the same ownership, modes, and access and modification
      times.  The -f option forces packing of name.  This is useful for
      causing an entire directory to be packed even if some of the files do
      not benefit.  If pack is successful, name is removed.  Packed files
      can be restored to their original form using unpack or pcat.

      pack uses Huffman (minimum redundancy) codes on a byte-by-byte basis.
      If the - argument is used, an internal flag is set that causes the
      number of times each byte is used, its relative frequency, and the
      code for the byte to be printed on the standard output.  Additional
      occurrences of - in place of name cause the internal flag to be set
      and reset.

      The amount of compression obtained depends on the size of the input
      file and the character frequency distribution.  Because a decoding
      tree forms the first part of each .z file, it is usually not
      worthwhile to pack files smaller than three blocks unless the
      character frequency distribution is very skewed such as in printer
      plots or pictures.

      Typically, text files are reduced to 60-75% of their original size.
      Load modules, which use a larger character set and have a more uniform
      distribution of characters, show little compression, the packed
      versions being about 90% of the original size.

      pack returns a value that is the number of files that it failed to
      compress.

      No packing occurs if:

	   +  The file appears to be already packed.
	   +  The file name has more than 12 characters and the file system
	      is configured as a short filename system.
	   +  The file has links.
	   +  The file is a directory.
	   +  The file cannot be opened.
	   +  The file is empty.




 Hewlett-Packard Company	    - 1 -   HP-UX Release 11i: November 2000






 pack(1)							     pack(1)




	   +  No disk storage blocks will be saved by packing.
	   +  A file called name.z already exists.
	   +  The .z file cannot be created.
	   +  An I/O error occurred during processing.

      On short-filename systems, the last segment of the file name must
      contain no more than 12 characters to allow space for the appended .z
      extension.  Directories cannot be compressed.

      pcat does for packed files what cat(1) does for ordinary files, except
      that pcat cannot be used as a filter.  The specified files are
      unpacked and written to the standard output.  Thus to view a packed
      file named name.z use:

	   pcat name.z

      or simply:

	   pcat name

      To make an unpacked copy (named file) of a packed file named name.z
      without destroying name.z) use the command:

	   pcat name >&gt&gt>file

      pcat returns the number of files it was unable to unpack.	 Failure may
      occur if:

	   +  The file name (exclusive of the .z) has more than 12
	      characters;
	   +  The file cannot be opened;
	   +  The file does not appear to have been created by pack.

      unpack expands files created by pack.  For each file name specified in
      the command, a search is made for a file called name.z (or just name
      if name ends in .z).  If this file appears to be a packed file, it is
      replaced by its expanded version.	 The new file has the .z suffix
      stripped from its name, and has the same access modes, access and
      modification dates, and owner as those of the packed file.

      unpack returns a value that is the number of files it was unable to
      unpack.  Failure may occur for the reasons given for pcat, as well as
      for the following:

	   +  A file with the ``unpacked'' name already exists;
	   +  The unpacked file cannot be created.

    Access Control Lists (ACLs)
      pack retains all entries in a file's access control list when
      compressing and expanding it (see acl(5)).




 Hewlett-Packard Company	    - 2 -   HP-UX Release 11i: November 2000






 pack(1)							     pack(1)




 DEPENDENCIES
    NFS
      Optional access control list entries of networked files are summarized
      (as returned in st_mode by stat(), but not copied to the new file (see
      stat(2)).

 WARNINGS
      This command is likely to be withdrawn from X/Open standards.
      Applications using this command might not be portable to other
      vendors' systems.	 Instead of pack it is recommended to use compress
      utility as it has the following advantages:

	   +  The algorithm used to create the output files is frequently
	      more effective in reducing the size of files
	   +  The compress utility can compress data from its standard
	      input, not just a named regular file. Thus it is useful in
	      pipelines

      zcat is recommended instead of pcat and, uncompress is recommended
      instead of unpack.

 SEE ALSO
      cat(1), compact(1), compress(1), acl(5).

 STANDARDS CONFORMANCE
      pack: SVID2, SVID3, XPG2, XPG3

      pcat: SVID2, SVID3, XPG2, XPG3

      unpack: SVID2, SVID3, XPG2, XPG3
























 Hewlett-Packard Company	    - 3 -   HP-UX Release 11i: November 2000