unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (Debian-5.0)
Page:
Section:
Apropos / Subsearch:
optional field

EDITRES(1)                  General Commands Manual                 EDITRES(1)



NAME
       editres - a dynamic resource editor for X Toolkit applications

SYNTAX
       editres [ -toolkitoption ... ]

OPTIONS
       Editres accepts all of the standard X Toolkit command line options (see
       X(7)).  The order of the command line options is not important.

DESCRIPTION
       Editres is a tool that allows users and application developers to  view
       the  full widget hierarchy of any X Toolkit application that speaks the
       Editres protocol.  In addition, editres will help  the  user  construct
       resource  specifications,  allow  the user to apply the resource to the
       application and view the results dynamically.  Once the user  is  happy
       with  a  resource specification editres will append the resource string
       to the user's X Resources file.

USING EDITRES
       Editres provides a window consisting of the following four areas:

       Menu Bar                 A set of  popup  menus  that  allow  you  full
                                access to editres's features.

       Panner                   The  panner  allows  a  more  intuitive way to
                                scroll the application tree display.

       Message Area             Displays information to  the  user  about  the
                                action that editres expects of her.

       Application Widget Tree  This area will be used to display the selected
                                application's widget tree.

       To begin an editres session select the Get Widget Tree menu  item  from
       the  command  menu.  This will change the pointer cursor to cross hair.
       You should now select the application you wish look at by  clicking  on
       any of its windows.  If this application understands the editres proto-
       col then editres will display the application's widget tree in its tree
       window.   If  the  application does not understand the editres protocol
       editres will inform you of this fact in the message area  after  a  few
       seconds delay.

       Once  you  have  a widget tree you may now select any of the other menu
       options. The effect of each of these is described below.

COMMANDS
       Get Widget Tree
               Allows the user to click on any  application  that  speaks  the
               editres protocol and receive its widget tree.

       Refresh Current Widget Tree
               Editres  only knows about the widgets that exist at the present
               time.  Many applications create and destroy widgets on the fly.
               Selecting this menu item will cause editres to ask the applica-
               tion to resend its widget tree, thus updating  its  information
               to the new state of the application.

               For  example, xman only creates the widgets for its topbox when
               it starts up.  None of the widgets for the manual  page  window
               are  created  until the user actually clicks on the Manual Page
               button.  If you retrieved xman's widget  tree  before  the  the
               manual  page is active, you may wish to refresh the widget tree
               after the manual page has been displayed.  This will allow  you
               to also edit the manual page's resources.

       Dump Widget Tree to a File
               For  documenting  applications it is often useful to be able to
               dump the entire application widget tree to an ASCII file.  This
               file  can  then be included in the manual page.  When this menu
               item is selected a popup dialog is activated.  Type the name of
               the file in this dialog, and either select okay, or type a car-
               riage-return.  Editres will now dump the widget  tree  to  this
               file.  To cancel the file dialog, select the cancel button.

       Show Resource Box
               This command will popup a resource box for the current applica-
               tion.  This resource box (described in detail below) will allow
               the user to see exactly which resources can be set for the wid-
               get that is currently selected  in  the  widget  tree  display.
               Only  one widget may be currently selected; if greater or fewer
               are selected editres will refuse to pop up the resource box and
               put an error message in the Message Area.

       Set Resource
               This  command  will  popup  a  simple dialog box for setting an
               arbitrary resource on all selected widgets.  You must  type  in
               the  resource  name, as well as the value.  You can use the Tab
               key to switch between the  resource  name  field  the  resource
               value field.

       Quit    Exits editres.

TREE COMMANDS
       The  Tree  menu  contains  several commands that allow operations to be
       performed on the widget tree.

       Select Widget in Client
              This menu item allows you to select any widget in  the  applica-
              tion;  editres will then highlight the corresponding element the
              widget tree display.   Once  this  menu  item  is  selected  the
              pointer  cursor  will  again  turn  to a crosshair, and you must
              click any pointer button in the widget you  wish  to  have  dis-
              played.   Since  some  widgets are fully obscured by their chil-
              dren, it is not possible to get to every widget  this  way,  but
              this  mechanism  does give very useful feedback between the ele-
              ments in the widget tree and those in the actual application.

       Select All

       Unselect All

       Invert All
              These functions allow the user to select,  unselect,  or  invert
              all widgets in the widget tree.

       Select Children

       Select Parents
              These  functions select the immediate parent or children of each
              of the currently selected widgets.

       Select Descendants

       Select Ancestors
              These functions select all parents or children of  each  of  the
              currently selected widgets.  This is a recursive search.

       Show Widget Names

       Show Class Names

       Show Widget IDs

       Show Widget Windows
              When  the  tree widget is initially displayed the labels of each
              widget in the tree correspond to the widget names.  These  func-
              tions  will  cause  the  label  of all widgets in the tree to be
              changed to show the class name, IDs, or window  associated  with
              each widget in the application.  The widget IDs, and windows are
              shown as hex numbers.

       In addition there are keyboard accelerators for each of the Tree opera-
       tions.   If  the  input focus is over an individual widget in the tree,
       then that operation will only effect that widget.  If the  input  focus
       is  in  the Tree background it will have exactly the same effect as the
       corresponding menu item.

       The translation entries shown may be  applied  to  any  widget  in  the
       application.   If  that  widget  is a child of the Tree widget, then it
       will only affect that widget, otherwise it will have the same effect as
       the commands in the tree menu.

       Flash Active Widgets
              This  command is the inverse of the Select Widget in Client com-
              mand, it will show  the  user  each  widget  that  is  currently
              selected  in the widget tree, by flashing the corresponding wid-
              get in the application numFlashes (three by  default)  times  in
              the flashColor.


              lb   lb   lb   l   l   l.   Key  Option    Translation  Entry  -
              space     Unselect  Select(nothing)   w    Select    Select(wid-
              get)   s    Select    Select(all)  i    Invert    Select(invert)
              c    Select  Children   Select(children)   d    Select   Descen-
              dants  Select(descendants)   p    Select  Parent  Select(parent)
              a    Select   Ancestors  Select(ancestors)   N    Show    Widget
              Names   Relabel(name)  C    Show  Class  Names    Relabel(class)
              I    Show  Widget  IDs   Relabel(id)   W    Show   Widget   Win-
              dows Relabel(window)  T    Toggle Widget/Class Name Relabel(tog-
              gle)

              Clicking button 1 on a widget adds it to  the  set  of  selected
              widgets.  Clicking button 2 on a widget deselects all other wid-
              gets and then selects just that widget.  Clicking button 3 on  a
              widget  toggles its label between the widget's instance name the
              widget's class name.


USING THE RESOURCE BOX
       The resource box contains five different areas.  Each of the areas,  as
       they appear on the screen, from top to bottom will be discussed.

       The Resource Line
              This  area  at  the  top  of  the resource box shows the current
              resource name exactly as it would appear if you were to save  it
              to a file or apply it.

       The Widget Names and Classes
              This  area  allows  you  to  select  exactly  which widgets this
              resource will apply to.  The area contains four lines, the first
              contains  the name of the selected widget and all its ancestors,
              and the more restrictive dot (.)  separator.   The  second  line
              contains  less specific the Class names of each widget, and well
              as the less restrictive star (*) separator.  The third line con-
              tains a set of special buttons called Any Widget which will gen-
              eralize this level to match any widget.  The last line  contains
              a set of special buttons called Any Widget Chain which will turn
              the single level into something that matches zero or  more  lev-
              els.

              The  initial  state  of this area is the most restrictive, using
              the resource names and the  dot  separator.   By  selecting  the
              other  buttons  in  this  area  you can ease the restrictions to
              allow more and more widgets to  match  the  specification.   The
              extreme  case  is  to  select  all the Any Widget Chain buttons,
              which will match every  widget  in  the  application.    As  you
              select  different  buttons  the tree display will update to show
              you exactly which  widgets  will  be  effected  by  the  current
              resource specification.

       Normal and Constraint Resources
              The  next  area  allows  you to select the name of the normal or
              constraint resources you wish to set.  Some widgets may not have
              constraint resources, so that area will not appear.

       Resource Value
              This  next  area  allows  you to enter the resource value.  This
              value should be entered exactly as you would type  a  line  into
              your  resource  file.   Thus it should contain no unescaped new-
              lines.  There are a few special  character  sequences  for  this
              file:

              \n - This will be replaced with a newline.

              \### - Where # is any octal digit.  This will be replaced with a
              single byte that contains this sequence interpreted as an  octal
              number.   For  example,  a  value  containing a NULL byte can be
              stored by specifying \000.

              \<new-line> - This will compress to nothing.

              \\ - This will compress to a single backslash.

       Command Area
              This area contains several command buttons,  described  in  this
              section.

       Set Save File
              This  button  allows  the user to modify file that the resources
              will be saved to.  This button will bring up a dialog  box  that
              will ask you for a filename; once the filename has been entered,
              either hit carriage-return or click on the okay button.  To  pop
              down  the  dialog  box without changing the save file, click the
              cancel button.

       Save   This button will append the resource line described above to the
              end  of the current save file.  If no save file has been set the
              Set Save File dialog box will be popped up to  prompt  the  user
              for a filename.

       Apply  This  button  attempts to perform a XtSetValues call on all wid-
              gets that match the resource line described  above.   The  value
              specified  is  applied  directly  to all matching widgets.  This
              behavior is an attempt to give a dynamic feel  to  the  resource
              editor.   Since  this feature allows users to put an application
              in states it may not be willing to handle, a hook has been  pro-
              vided  to  allow  specific applications to block these SetValues
              requests (see Blocking Editres Requests below).

              Unfortunately due to design constraints imposed on  the  widgets
              by  the  X Toolkit and the Resource Manager, trying to coerce an
              inherently static system into dynamic behavior can cause strange
              results.   There  is  no  guarantee that the results of an apply
              will be the same as what will happen when you save the value and
              restart  the application.  This functionality is provided to try
              to give you a rough feel for what your changes will  accomplish,
              and  the  results obtained should be considered suspect at best.
              Having said that,  this  is  one  of  the  neatest  features  of
              editres,  and  I strongly suggest that you play with it, and see
              what it can do.

       Save and Apply
              This button combines the Save and Apply actions described  above
              into one button.

       Popdown Resource Box
              This button will remove the resource box from the display.

BLOCKING EDITRES REQUESTS
       The  editres  protocol has been built into the Athena Widget set.  This
       allows all applications that are linked against Xaw to be able to speak
       to  the resource editor.  While this provides great flexibility, and is
       a useful tool, it can quite easily be abused.  It is therefore possible
       for  any  Xaw  application  to  specify  a  value  for the editresBlock
       resource described below, to keep editres  from  divulging  information
       about its internals, or to disable the SetValues part of the protocol.

       editresBlock (Class EditresBlock)
               Specifies  which  type  of  blocking this application wishes to
               impose on the editres protocol.

       The accepted values are:

       all            Block all requests.

       setValues      Block all SetValues  requests.   As  this  is  the  only
                      editres  request that actually modifies the application,
                      this is in effect stating that the application is  read-
                      only.

       none           Allow all editres requests.

       Remember  that  these  resources  are  set  on any Xaw application, not
       editres.  They allow individual applications to keep all or some of the
       requests  editres  makes  from  ever succeeding.  Of course, editres is
       also an Xaw application, so it may  also  be  viewed  and  modified  by
       editres  (rather  recursive,  I know), these commands can be blocked by
       setting the editresBlock resource on editres itself.

RESOURCES
       For editres the available application resources are:

       numFlashes (Class NumFlashes)
               Specifies the number of times the widgets  in  the  application
               will  be  flashed  when  the  Show  Active  Widgets  command in
               invoked.

       flashTime (Class FlashTime)
               Amount of time between the flashes described above.

       flashColor (Class flashColor)
               Specifies the color  used  to  flash  application  widgets.   A
               bright  color  should  be  used that will immediately draw your
               attention to the area being flashed, such as red or yellow.

       saveResourcesFile (Class SaveResourcesFile)
               This is the file the resource line will be append to  when  the
               Save button activated in the resource box.

WIDGETS
       In  order  to  specify resources, it is useful to know the hierarchy of
       the widgets which compose editres.  In the notation below,  indentation
       indicates  hierarchical  structure.   The  widget  class  name is given
       first, followed by the widget instance name.

       Editres  editres
            Paned  paned
                 Box  box
                      MenuButton  commands
                           SimpleMenu  menu
                           SmeBSB  sendTree
                           SmeBSB  refreshTree
                           SmeBSB  dumpTreeToFile
                           SmeLine  line
                           SmeBSB  getResourceList
                           SmeLine  line
                           SmeBSB  quit
                      MenuButton  treeCommands
                           SimpleMenu  menu
                           SmeBSB  showClientWidget
                           SmeBSB  selectAll
                           SmeBSB  unselectAll
                           SmeBSB  invertAll
                           SmeLine  line
                           SmeBSB  selectChildren
                           SmeBSB  selectParent
                           SmeBSB  selectDescendants
                           SmeBSB  selectAncestors
                           SmeLine  line
                           SmeBSB  showWidgetNames
                           SmeBSB  showClassNames
                           SmeBSB  showWidgetIDs
                           SmeBSB  showWidgetWindows
                           SmeLine  line
                           SmeBSB  flashActiveWidgets
                 Paned  hPane
                      Panner  panner
                      Label  userMessage
                      Grip  grip
                 Porthole  porthole
                      Tree  tree
                           Toggle  <name of widget in application>
                           .
                           .
                           .
                           TransientShell  resourceBox
                           Paned  pane
                           Label  resourceLabel
                           Form  namesAndClasses
                           Toggle  dot
                           Toggle  star
                           Toggle  any
                           Toggle  name
                           Toggle  class
                                .
                                .
                                .
                           Label  namesLabel
                           List  namesList
                           Label  constraintLabel
                           List  constraintList
                           Form  valueForm
                           Label  valueLabel
                           Text  valueText
                           Box  commandBox
                           Command  setFile
                           Command  save
                           Command  apply
                           Command  saveAndApply
                           Command  cancel
                           Grip  grip
                 Grip  grip


ENVIRONMENT
       DISPLAY to get the default host and display number.

       XENVIRONMENT
               to get the name of a resource file that  overrides  the  global
               resources stored in the RESOURCE_MANAGER property.

FILES
       /etc/X11/app-defaults/Editres
              specifies required resources

SEE ALSO
       X(7), xrdb(1), Athena Widget Set

RESTRICTIONS
       This  is  a prototype, there are lots of nifty features I would love to
       add, but I hope this will give you some ideas  about  what  a  resource
       editor can do.

AUTHOR
       Chris D. Peterson, formerly MIT X Consortium




X Version 11                     editres 1.0.3                      EDITRES(1)