CLICK(1) General Commands Manual CLICK(1)
click - enable or disable the keyboard's keystroke click
click [ -y ] [ -n ] [ -d keyboard-device ]
Change the setting of the audible keyboard click. The default is no
keyboard click. If you want to turn clicking on then a good place to
do it is in /etc/rc.local.
Only keyboards that support a clicker respond to this command. At the
time of this writing, the only keyboards known to have a clicker are
the Sun-3 and Sun386i systems keyboards.
-y Yes, enable clicking.
-n No, disable clicking.
Specify the keyboard device being set. The default is /dev/kbd.
A short help message is printed if an unknown flag is specified or if
the -d switch is used and the keyboard device name is not supplied. A
diagnostic is printed if the keyboard device name can't be opened or is
not a keyboard type device.
There is no way to determine the state of the keyboard click setting.
18 February 1988 CLICK(1)