unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (OpenBSD-5.7)
Page:
Section:
Apropos / Subsearch:
optional field

Browse Results (233):

Manual PageDescription
OpenBSD 5.7 EV_SET(2) kernel event notification mechanism
OpenBSD 5.7 S_ISBLK(2) get file status
OpenBSD 5.7 S_ISCHR(2) get file status
OpenBSD 5.7 S_ISDIR(2) get file status
OpenBSD 5.7 S_ISFIFO(2) get file status
OpenBSD 5.7 S_ISLNK(2) get file status
OpenBSD 5.7 S_ISREG(2) get file status
OpenBSD 5.7 S_ISSOCK(2) get file status
OpenBSD 5.7 WCOREDUMP(2) wait for process termination
OpenBSD 5.7 WEXITSTATUS(2) wait for process termination
OpenBSD 5.7 WIFCONTINUED(2) wait for process termination
OpenBSD 5.7 WIFEXITED(2) wait for process termination
OpenBSD 5.7 WIFSIGNALED(2) wait for process termination
OpenBSD 5.7 WIFSTOPPED(2) wait for process termination
OpenBSD 5.7 WSTOPSIG(2) wait for process termination
OpenBSD 5.7 WTERMSIG(2) wait for process termination
OpenBSD 5.7 _Exit(2) terminate the calling process
OpenBSD 5.7 __get_tcb(2) get and set the address of the thread control block of the current thread
OpenBSD 5.7 __set_tcb(2) get and set the address of the thread control block of the current thread
OpenBSD 5.7 __syscall(2) indirect system call
OpenBSD 5.7 __tfork(2) create a new kernel thread in the current process
OpenBSD 5.7 __thrsigdivert(2) synchronously accept a signal
OpenBSD 5.7 __thrsleep(2) userspace thread sleep and wakeup
OpenBSD 5.7 __thrwakeup(2) userspace thread sleep and wakeup
OpenBSD 5.7 _exit(2) terminate the calling process
OpenBSD 5.7 accept(2) accept a connection on a socket
OpenBSD 5.7 accept4(2) accept a connection on a socket
OpenBSD 5.7 access(2) check access permissions of a file or pathname
OpenBSD 5.7 acct(2) enable or disable process accounting
OpenBSD 5.7 adjfreq(2) correct the rate of the system clock
OpenBSD 5.7 adjtime(2) correct the time to allow synchronization of the system clock
OpenBSD 5.7 bind(2) bind a name to a socket
OpenBSD 5.7 brk(2) change data segment size
OpenBSD 5.7 chdir(2) change current working directory
OpenBSD 5.7 chflags(2) set file flags
OpenBSD 5.7 chflagsat(2) set file flags
OpenBSD 5.7 chmod(2) change mode of file
OpenBSD 5.7 chown(2) change owner and group of a file or link
OpenBSD 5.7 chroot(2) change root directory
OpenBSD 5.7 clock_getres(2) get/set/calibrate date and time
OpenBSD 5.7 clock_gettime(2) get/set/calibrate date and time
OpenBSD 5.7 clock_settime(2) get/set/calibrate date and time
OpenBSD 5.7 close(2) delete a descriptor
OpenBSD 5.7 closefrom(2) delete many descriptors
OpenBSD 5.7 connect(2) initiate a connection on a socket
OpenBSD 5.7 dup(2) duplicate an existing file descriptor
OpenBSD 5.7 dup2(2) duplicate an existing file descriptor
OpenBSD 5.7 dup3(2) duplicate an existing file descriptor
OpenBSD 5.7 errno(2) introduction to system calls and error numbers
OpenBSD 5.7 exect(2) execute a file
OpenBSD 5.7 execve(2) execute a file
OpenBSD 5.7 faccessat(2) check access permissions of a file or pathname
OpenBSD 5.7 fchdir(2) change current working directory
OpenBSD 5.7 fchflags(2) set file flags
OpenBSD 5.7 fchmod(2) change mode of file
OpenBSD 5.7 fchmodat(2) change mode of file
OpenBSD 5.7 fchown(2) change owner and group of a file or link
OpenBSD 5.7 fchownat(2) change owner and group of a file or link
OpenBSD 5.7 fcntl(2) file control
OpenBSD 5.7 fdatasync(2) synchronize a file's in-core state with that on disk
OpenBSD 5.7 fhopen(2) access file via file handle
OpenBSD 5.7 fhstat(2) access file via file handle
OpenBSD 5.7 fhstatfs(2) access file via file handle
OpenBSD 5.7 flock(2) apply or remove an advisory lock on an open file
OpenBSD 5.7 fork(2) create a new process
OpenBSD 5.7 fpathconf(2) get configurable pathname variables
OpenBSD 5.7 fstat(2) get file status
OpenBSD 5.7 fstatat(2) get file status
OpenBSD 5.7 fstatfs(2) get file system statistics
OpenBSD 5.7 fsync(2) synchronize a file's in-core state with that on disk
OpenBSD 5.7 ftruncate(2) truncate or extend a file to a specified length
OpenBSD 5.7 futimens(2) set file access and modification times
OpenBSD 5.7 futimes(2) set file access and modification times
OpenBSD 5.7 getdents(2) get directory entries in a filesystem independent format
OpenBSD 5.7 getdtablecount(2) get descriptor table count
OpenBSD 5.7 getegid(2) get group process identification
OpenBSD 5.7 getentropy(2) get entropy
OpenBSD 5.7 geteuid(2) get user identification
OpenBSD 5.7 getfh(2) get file handle
OpenBSD 5.7 getfsstat(2) get list of all mounted file systems
OpenBSD 5.7 getgid(2) get group process identification
OpenBSD 5.7 getgroups(2) get group access list
OpenBSD 5.7 getitimer(2) get/set value of interval timer
OpenBSD 5.7 getlogin(2) get/set login name
OpenBSD 5.7 getlogin_r(2) get/set login name
OpenBSD 5.7 getpeername(2) get name of connected peer
OpenBSD 5.7 getpgid(2) get process group
OpenBSD 5.7 getpgrp(2) get process group
OpenBSD 5.7 getpid(2) get parent or calling process identification
OpenBSD 5.7 getppid(2) get parent or calling process identification
OpenBSD 5.7 getpriority(2) get/set process scheduling priority
OpenBSD 5.7 getresgid(2) get or set real, effective and saved user or group ID
OpenBSD 5.7 getresuid(2) get or set real, effective and saved user or group ID
OpenBSD 5.7 getrlimit(2) control maximum system resource consumption
OpenBSD 5.7 getrtable(2) get and set the default routing table of the current process
OpenBSD 5.7 getrusage(2) get information about resource utilization
OpenBSD 5.7 getsid(2) get process session
OpenBSD 5.7 getsockname(2) get socket name
OpenBSD 5.7 getsockopt(2) get and set options on sockets
OpenBSD 5.7 getthrid(2) get thread identifier
OpenBSD 5.7 gettimeofday(2) get/set date and time
OpenBSD 5.7 getuid(2) get user identification
OpenBSD 5.7 intro(2) introduction to system calls and error numbers
OpenBSD 5.7 ioctl(2) control device
OpenBSD 5.7 issetugid(2) is current executable running setuid or setgid
OpenBSD 5.7 kevent(2) kernel event notification mechanism
OpenBSD 5.7 kill(2) send signal to a process
OpenBSD 5.7 kqueue(2) kernel event notification mechanism
OpenBSD 5.7 ktrace(2) process tracing
OpenBSD 5.7 lchown(2) change owner and group of a file or link
OpenBSD 5.7 link(2) make hard link to a file
OpenBSD 5.7 linkat(2) make hard link to a file
OpenBSD 5.7 listen(2) listen for connections on a socket
OpenBSD 5.7 lseek(2) reposition read/write file offset
OpenBSD 5.7 lstat(2) get file status
OpenBSD 5.7 madvise(2) give advice about use of memory
OpenBSD 5.7 mincore(2) determine residency of memory pages
OpenBSD 5.7 minherit(2) control the inheritance of pages
OpenBSD 5.7 mkdir(2) make a directory file
OpenBSD 5.7 mkdirat(2) make a directory file
OpenBSD 5.7 mkfifo(2) make a FIFO file
OpenBSD 5.7 mkfifoat(2) make a FIFO file
OpenBSD 5.7 mknod(2) make a special file node
OpenBSD 5.7 mknodat(2) make a special file node
OpenBSD 5.7 mlock(2) lock (unlock) physical pages in memory
OpenBSD 5.7 mlockall(2) lock (unlock) the address space of a process
OpenBSD 5.7 mmap(2) map files or devices into memory
OpenBSD 5.7 mount(2) mount or dismount a filesystem
OpenBSD 5.7 mprotect(2) control the protection of pages
OpenBSD 5.7 mquery(2) provide mapping hints to applications
OpenBSD 5.7 msgctl(2) message control operations
OpenBSD 5.7 msgget(2) get message queue
OpenBSD 5.7 msgrcv(2) receive a message from a message queue
OpenBSD 5.7 msgsnd(2) send a message to a message queue
OpenBSD 5.7 msync(2) synchronize a mapped region
OpenBSD 5.7 munlock(2) lock (unlock) physical pages in memory
OpenBSD 5.7 munlockall(2) lock (unlock) the address space of a process
OpenBSD 5.7 munmap(2) remove a mapping
OpenBSD 5.7 nanosleep(2) high resolution sleep
OpenBSD 5.7 nfssvc(2) NFS services
OpenBSD 5.7 open(2) open or create a file for reading or writing
OpenBSD 5.7 openat(2) open or create a file for reading or writing
OpenBSD 5.7 pathconf(2) get configurable pathname variables
OpenBSD 5.7 pipe(2) create descriptor pair for interprocess communication
OpenBSD 5.7 pipe2(2) create descriptor pair for interprocess communication
OpenBSD 5.7 poll(2) synchronous I/O multiplexing
OpenBSD 5.7 posix_madvise(2) give advice about use of memory
OpenBSD 5.7 ppoll(2) synchronous I/O multiplexing
OpenBSD 5.7 pread(2) read input
OpenBSD 5.7 preadv(2) read input
OpenBSD 5.7 profil(2) control process profiling
OpenBSD 5.7 pselect(2) synchronous I/O multiplexing
OpenBSD 5.7 ptrace(2) process tracing and debugging
OpenBSD 5.7 pwrite(2) write output
OpenBSD 5.7 pwritev(2) write output
OpenBSD 5.7 quotactl(2) manipulate filesystem quotas
OpenBSD 5.7 read(2) read input
OpenBSD 5.7 readlink(2) read value of a symbolic link
OpenBSD 5.7 readlinkat(2) read value of a symbolic link
OpenBSD 5.7 readv(2) read input
OpenBSD 5.7 reboot(2) reboot system or halt processor
OpenBSD 5.7 recv(2) receive a message from a socket
OpenBSD 5.7 recvfrom(2) receive a message from a socket
OpenBSD 5.7 recvmsg(2) receive a message from a socket
OpenBSD 5.7 rename(2) change the name of a file
OpenBSD 5.7 renameat(2) change the name of a file
OpenBSD 5.7 revoke(2) revoke file access
OpenBSD 5.7 rmdir(2) remove a directory file
OpenBSD 5.7 sbrk(2) change data segment size
OpenBSD 5.7 sched_yield(2) yield the processor
OpenBSD 5.7 select(2) synchronous I/O multiplexing
OpenBSD 5.7 semctl(2) semaphore control operations
OpenBSD 5.7 semget(2) get semaphore set
OpenBSD 5.7 semop(2) semaphore operations
OpenBSD 5.7 send(2) send a message from a socket
OpenBSD 5.7 sendmsg(2) send a message from a socket
OpenBSD 5.7 sendsyslog(2) send a message to syslogd
OpenBSD 5.7 sendto(2) send a message from a socket
OpenBSD 5.7 setegid(2) set user and group ID
OpenBSD 5.7 seteuid(2) set user and group ID
OpenBSD 5.7 setgid(2) set user and group ID
OpenBSD 5.7 setgroups(2) set group access list
OpenBSD 5.7 setitimer(2) get/set value of interval timer
OpenBSD 5.7 setlogin(2) get/set login name
OpenBSD 5.7 setpgid(2) set process group
OpenBSD 5.7 setpgrp(2) set process group
OpenBSD 5.7 setpriority(2) get/set process scheduling priority
OpenBSD 5.7 setregid(2) set real and effective group IDs
OpenBSD 5.7 setresgid(2) get or set real, effective and saved user or group ID
OpenBSD 5.7 setresuid(2) get or set real, effective and saved user or group ID
OpenBSD 5.7 setreuid(2) set real and effective user IDs
OpenBSD 5.7 setrlimit(2) control maximum system resource consumption
OpenBSD 5.7 setrtable(2) get and set the default routing table of the current process
OpenBSD 5.7 setsid(2) create session and set process group ID
OpenBSD 5.7 setsockopt(2) get and set options on sockets
OpenBSD 5.7 settimeofday(2) get/set date and time
OpenBSD 5.7 setuid(2) set user and group ID
OpenBSD 5.7 shmat(2) map/unmap shared memory
OpenBSD 5.7 shmctl(2) shared memory control operations
OpenBSD 5.7 shmdt(2) map/unmap shared memory
OpenBSD 5.7 shmget(2) get shared memory area identifier
OpenBSD 5.7 shutdown(2) disable sends or receives on a socket
OpenBSD 5.7 sigaction(2) software signal facilities
OpenBSD 5.7 sigaltstack(2) set and/or get signal stack context
OpenBSD 5.7 sigpending(2) get pending signals
OpenBSD 5.7 sigprocmask(2) manipulate current signal mask
OpenBSD 5.7 sigreturn(2) return from signal
OpenBSD 5.7 sigsuspend(2) atomically change the signal mask and wait for interrupt
OpenBSD 5.7 socket(2) create an endpoint for communication
OpenBSD 5.7 socketpair(2) create a pair of connected sockets
OpenBSD 5.7 stat(2) get file status
OpenBSD 5.7 statfs(2) get file system statistics
OpenBSD 5.7 swapctl(2) modify swap configuration
OpenBSD 5.7 symlink(2) make symbolic link to a file
OpenBSD 5.7 symlinkat(2) make symbolic link to a file
OpenBSD 5.7 sync(2) synchronize disk block in-core status with that on disk
OpenBSD 5.7 sysarch(2) architecture-dependent system call
OpenBSD 5.7 syscall(2) indirect system call
OpenBSD 5.7 truncate(2) truncate or extend a file to a specified length
OpenBSD 5.7 umask(2) set file creation mode mask
OpenBSD 5.7 unlink(2) remove directory entry
OpenBSD 5.7 unlinkat(2) remove directory entry
OpenBSD 5.7 unmount(2) mount or dismount a filesystem
OpenBSD 5.7 utimensat(2) set file access and modification times
OpenBSD 5.7 utimes(2) set file access and modification times
OpenBSD 5.7 utrace(2) insert user record in ktrace log
OpenBSD 5.7 vfork(2) spawn new process and block parent
OpenBSD 5.7 wait(2) wait for process termination
OpenBSD 5.7 wait3(2) wait for process termination
OpenBSD 5.7 wait4(2) wait for process termination
OpenBSD 5.7 waitpid(2) wait for process termination
OpenBSD 5.7 write(2) write output
OpenBSD 5.7 writev(2) write output
Generated in 0.0502 seconds