unixdev.net


Switch to SpeakEasy.net DSL

The Modular Manual Browser

Home Page
Manual: (Darwin-7.0.1-ppc)
Page:
Section:
Apropos / Subsearch:
optional field

Browse Results (173):

Manual PageDescription
Darwin 7.0.1 __syscall(2) indirect system call
Darwin 7.0.1 _exit(2) terminate the calling process
Darwin 7.0.1 accept(2) accept a connection on a socket
Darwin 7.0.1 access(2) check access permissions of a file or pathname
Darwin 7.0.1 acct(2) enable or disable process accounting
Darwin 7.0.1 adjtime(2) correct the time to allow synchronization of the system clock
Darwin 7.0.1 bind(2) bind a name to a socket
Darwin 7.0.1 brk(2) change data segment size
Darwin 7.0.1 chdir(2) change current working directory
Darwin 7.0.1 chflags(2) set file flags
Darwin 7.0.1 chmod(2) change mode of file
Darwin 7.0.1 chown(2) change owner and group of a file or link
Darwin 7.0.1 chroot(2) change root directory
Darwin 7.0.1 close(2) delete a descriptor
Darwin 7.0.1 connect(2) initiate a connection on a socket
Darwin 7.0.1 creat(2) create a new file
Darwin 7.0.1 dup(2) duplicate an existing file descriptor
Darwin 7.0.1 dup2(2) duplicate an existing file descriptor
Darwin 7.0.1 execve(2) execute a file
Darwin 7.0.1 fchdir(2) change current working directory
Darwin 7.0.1 fchflags(2) set file flags
Darwin 7.0.1 fchmod(2) change mode of file
Darwin 7.0.1 fchown(2) change owner and group of a file or link
Darwin 7.0.1 fcntl(2) file control
Darwin 7.0.1 flock(2) apply or remove an advisory lock on an open file
Darwin 7.0.1 fork(2) create a new process
Darwin 7.0.1 fpathconf(2) get configurable pathname variables
Darwin 7.0.1 fsctl(2) control filesystems
Darwin 7.0.1 fstat(2) get file status
Darwin 7.0.1 fstatfs(2) get file system statistics
Darwin 7.0.1 fsync(2) synchronize a file's in-core state with that on disk
Darwin 7.0.1 ftruncate(2) truncate or extend a file to a specified length
Darwin 7.0.1 futimes(2) set file access and modification times
Darwin 7.0.1 getdirentries(2) get directory entries in a filesystem independent format
Darwin 7.0.1 getdtablesize(2) get descriptor table size
Darwin 7.0.1 getegid(2) get group process identification
Darwin 7.0.1 geteuid(2) get user identification
Darwin 7.0.1 getfh(2) get file handle
Darwin 7.0.1 getfsstat(2) get list of all mounted file systems
Darwin 7.0.1 getgid(2) get group process identification
Darwin 7.0.1 getgroups(2) get group access list
Darwin 7.0.1 getitimer(2) get/set value of interval timer
Darwin 7.0.1 getlogin(2) get/set login name
Darwin 7.0.1 getpeername(2) get name of connected peer
Darwin 7.0.1 getpgid(2) get process group
Darwin 7.0.1 getpgrp(2) get process group
Darwin 7.0.1 getpid(2) get parent or calling process identification
Darwin 7.0.1 getppid(2) get parent or calling process identification
Darwin 7.0.1 getpriority(2) get/set program scheduling priority
Darwin 7.0.1 getrlimit(2) control maximum system resource consumption
Darwin 7.0.1 getrusage(2) get information about resource utilization
Darwin 7.0.1 getsid(2) get process session
Darwin 7.0.1 getsockname(2) get socket name
Darwin 7.0.1 getsockopt(2) get and set options on sockets
Darwin 7.0.1 gettimeofday(2) get/set date and time
Darwin 7.0.1 getuid(2) get user identification
Darwin 7.0.1 intro(2) introduction to system calls and error numbers
Darwin 7.0.1 ioctl(2) control device
Darwin 7.0.1 issetugid(2) is current executable running setuid or setgid
Darwin 7.0.1 kill(2) send signal to a process
Darwin 7.0.1 killpg(2) send signal to a process group
Darwin 7.0.1 kqueue(2) kernel event notification mechanism
Darwin 7.0.1 ktrace(2) process tracing
Darwin 7.0.1 lchown(2) change owner and group of a file or link
Darwin 7.0.1 link(2) make a hard file link
Darwin 7.0.1 listen(2) listen for connections on a socket
Darwin 7.0.1 lseek(2) reposition read/write file offset
Darwin 7.0.1 lstat(2) get file status
Darwin 7.0.1 madvise(2) give advice about use of memory
Darwin 7.0.1 mincore(2) determine residency of memory pages
Darwin 7.0.1 minherit(2) control the inheritance of pages
Darwin 7.0.1 mkdir(2) make a directory file
Darwin 7.0.1 mkfifo(2) make a fifo file
Darwin 7.0.1 mknod(2) make a special file node
Darwin 7.0.1 mlock(2) lock (unlock) physical pages in memory
Darwin 7.0.1 mmap(2) map files or devices into memory
Darwin 7.0.1 mount(2) mount or dismount a filesystem
Darwin 7.0.1 mprotect(2) control the protection of pages
Darwin 7.0.1 msync(2) synchronize a mapped region
Darwin 7.0.1 munlock(2) lock (unlock) physical pages in memory
Darwin 7.0.1 munmap(2) remove a mapping
Darwin 7.0.1 nanosleep(2) suspend process execution for an interval measured in nanoseconds
Darwin 7.0.1 nfssvc(2) NFS services
Darwin 7.0.1 open(2) open or create a file for reading or writing
Darwin 7.0.1 pathconf(2) get configurable pathname variables
Darwin 7.0.1 pipe(2) create descriptor pair for interprocess communication
Darwin 7.0.1 posix_madvise(2) give advice about use of memory
Darwin 7.0.1 pread(2) read input
Darwin 7.0.1 profil(2) control process profiling
Darwin 7.0.1 pthread_kill(2) send a signal to a specified thread
Darwin 7.0.1 pthread_sigmask(2) examine and/or change a thread's signal mask
Darwin 7.0.1 ptrace(2) process tracing and debugging
Darwin 7.0.1 pwrite(2) write output
Darwin 7.0.1 quotactl(2) manipulate filesystem quotas
Darwin 7.0.1 read(2) read input
Darwin 7.0.1 readlink(2) read value of a symbolic link
Darwin 7.0.1 readv(2) read input
Darwin 7.0.1 reboot(2) reboot system or halt processor
Darwin 7.0.1 recv(2) receive a message from a socket
Darwin 7.0.1 recvfrom(2) receive a message from a socket
Darwin 7.0.1 recvmsg(2) receive a message from a socket
Darwin 7.0.1 rename(2) change the name of a file
Darwin 7.0.1 revoke(2) revoke file access
Darwin 7.0.1 rmdir(2) remove a directory file
Darwin 7.0.1 sbrk(2) change data segment size
Darwin 7.0.1 select(2) synchronous I/O multiplexing
Darwin 7.0.1 sem_close(2) close a named semaphore
Darwin 7.0.1 sem_open(2) initialize and open a named semaphore
Darwin 7.0.1 sem_post(2) unlock a semaphore
Darwin 7.0.1 sem_trywait(2) lock a semaphore
Darwin 7.0.1 sem_unlink(2) remove a named semaphore
Darwin 7.0.1 sem_wait(2) lock a semaphore
Darwin 7.0.1 semctl(2) control operations on a semaphore set
Darwin 7.0.1 semget(2) obtain a semaphore id
Darwin 7.0.1 semop(2) atomic array of operations on a semaphore set
Darwin 7.0.1 send(2) send a message from a socket
Darwin 7.0.1 sendmsg(2) send a message from a socket
Darwin 7.0.1 sendto(2) send a message from a socket
Darwin 7.0.1 setegid(2) set user and group ID
Darwin 7.0.1 seteuid(2) set user and group ID
Darwin 7.0.1 setgid(2) set user and group ID
Darwin 7.0.1 setgroups(2) set group access list
Darwin 7.0.1 setitimer(2) get/set value of interval timer
Darwin 7.0.1 setlogin(2) get/set login name
Darwin 7.0.1 setpgid(2) set process group
Darwin 7.0.1 setpgrp(2) set process group
Darwin 7.0.1 setpriority(2) get/set program scheduling priority
Darwin 7.0.1 setregid(2) set real and effective group ID
Darwin 7.0.1 setreuid(2) set real and effective user ID's
Darwin 7.0.1 setrlimit(2) control maximum system resource consumption
Darwin 7.0.1 setsid(2) create session and set process group ID
Darwin 7.0.1 setsockopt(2) get and set options on sockets
Darwin 7.0.1 settimeofday(2) get/set date and time
Darwin 7.0.1 setuid(2) set user and group ID
Darwin 7.0.1 shm_open(2) open a shared memory object
Darwin 7.0.1 shm_unlink(2) remove shared memory object
Darwin 7.0.1 shmat(2) map/unmap shared memory
Darwin 7.0.1 shmctl(2) shared memory control operations
Darwin 7.0.1 shmdt(2) map/unmap shared memory
Darwin 7.0.1 shmget(2) get shared memory area identifier
Darwin 7.0.1 shutdown(2) shut down part of a full-duplex connection
Darwin 7.0.1 sigaction(2) software signal facilities
Darwin 7.0.1 sigaltstack(2) set and/or get signal stack context
Darwin 7.0.1 sigblock(2) block signals
Darwin 7.0.1 sigmask(2) set current signal mask
Darwin 7.0.1 sigpause(2) atomically release blocked signals and wait for interrupt
Darwin 7.0.1 sigpending(2) get pending signals
Darwin 7.0.1 sigprocmask(2) manipulate current signal mask
Darwin 7.0.1 sigreturn(2) return from signal
Darwin 7.0.1 sigsetmask(2) set current signal mask
Darwin 7.0.1 sigstack(2) set and/or get signal stack context
Darwin 7.0.1 sigsuspend(2) atomically release blocked signals and wait for interrupt
Darwin 7.0.1 sigvec(2) software signal facilities
Darwin 7.0.1 sigwait(2) select a set of signals
Darwin 7.0.1 socket(2) create an endpoint for communication
Darwin 7.0.1 socketpair(2) create a pair of connected sockets
Darwin 7.0.1 stat(2) get file status
Darwin 7.0.1 statfs(2) get file system statistics
Darwin 7.0.1 symlink(2) make symbolic link to a file
Darwin 7.0.1 sync(2) synchronize disk block in-core status with that on disk
Darwin 7.0.1 syscall(2) indirect system call
Darwin 7.0.1 truncate(2) truncate or extend a file to a specified length
Darwin 7.0.1 umask(2) set file creation mode mask
Darwin 7.0.1 unlink(2) remove directory entry
Darwin 7.0.1 unmount(2) mount or dismount a filesystem
Darwin 7.0.1 utimes(2) set file access and modification times
Darwin 7.0.1 vfork(2) spawn new process in a virtual memory efficient way
Darwin 7.0.1 wait(2) wait for process termination
Darwin 7.0.1 wait3(2) wait for process termination
Darwin 7.0.1 wait4(2) wait for process termination
Darwin 7.0.1 waitpid(2) wait for process termination
Darwin 7.0.1 write(2) write output
Darwin 7.0.1 writev(2) write output
Generated in 0.0393 seconds